Big Blazer Audio build
6 Attachment(s)
It's going to be off to a slow start.
Plans are 6 Incriminator Audio Death penalty 15' in a flat wall. 3 Incriminator Audio IA40.1's 3 Incriminator Audio IA6.4's 4 Incriminator Audio I6.5 comp sets Dedicated mid bass, most likely my mpyre 6.5s Some kind of a decent super tweeter(keep up with the bass) XS power batteries MechMan 270 or 320amp alt Haven't decided on deadener yet. It will either be second skin or stinger CAI-will decide later on Most likely a PCMforless tune Projectors up front and eventually upgrade all the lights Get a matching spare Maybe a push bar Lots of little stuff Replace drivers door Here's what's going on today. This is just stuff to hold me over until the big gear arrives. https://blazerforum.com/forum/attach...ine=1356642130 Dash Kit http://i275.photobucket.com/albums/j...227_134710.jpg 2ch RCAs for sub stage Attachment 31954 for highs Attachment 31955 ZRS40t tweeters https://blazerforum.com/forum/attach...ine=1356642130 The wires :) http://i275.photobucket.com/albums/j...227_135224.jpg Mids, xovers, HU harness, antenna adapter Attachment 31956 Attachment 31957 That's it for now, I'll try to take progress pics. |
If you think shes got a "cali lean" now, just wait till you get all that MDF in the back. Im subscribed, I wanna see how this all turns out.
|
I'm sure it'll get much worse lol
I will be getting a bag kit for it. I'm on team xs power now :) in case you don't know who that is XS Power | Real Power, Unreal Performance |
4 Attachment(s)
No audio updates still :(
Finally got the old sway bar links off. I burned up all my dremle tool cutting wheels and had to resort to a hack saw... It was a nightmare. https://blazerforum.com/forum/attach...ine=1357089115 https://blazerforum.com/forum/attach...ine=1357089115 https://blazerforum.com/forum/attach...ine=1357089115 Cap and rotor didn't look too bad https://blazerforum.com/forum/attach...ine=1357089115 http://i275.photobucket.com/albums/j...231_190045.jpg |
4 Attachment(s)
This is dragging ass.... Not many updates really. Still gotta fix the 4wd and the HVAC controls. Need to do front axle seals and some front end work.
I'm still waiting on subs. I've been stocking up on other gear though. https://blazerforum.com/forum/attach...ine=1362264482 still need two more https://blazerforum.com/forum/attach...ine=1362264482 175ft of 0ga https://blazerforum.com/forum/attach...ine=1362264482 got a note 2 https://blazerforum.com/forum/attach...ine=1362264482 I also ordered one of these. AVH-X5500BHS - <b>NEW!</b> - 2-DIN Multimedia DVD Receiver with 7" WVGA Touchscreen Display, MIXTRAX, Bluetooth®, HD Radio™ Tuner, SiriusXM Ready, and AppRadio Mode for iPhone® | Pioneer Electronics USA I will be modding the dash bezel until I have the cash to buy an 03+ dash bezel. |
8 Attachment(s)
Got some gear today!
One of my 18s(three more in route) and four comp sets. These subs cannot be described. I'm honestly blown away by the build quality of these. I ran a good number of various drivers last year, and for these to be hand built in Alabama, it's amazing. Absolutely beautiful. Pictures do these no justice at all. Way beefier than I thought too. Pictures https://blazerforum.com/forum/attach...ine=1362454959 https://blazerforum.com/forum/attach...ine=1362454959 https://blazerforum.com/forum/attach...ine=1362454959 https://blazerforum.com/forum/attach...ine=1362454959 https://blazerforum.com/forum/attach...ine=1362454959 Wasn't hurt https://blazerforum.com/forum/attach...ine=1362454959 https://blazerforum.com/forum/attach...ine=1362454959 https://blazerforum.com/forum/attach...ine=1362454959 |
5 Attachment(s)
|
2 Attachment(s)
Stepping up my game
https://blazerforum.com/forum/attach...ine=1362537197 https://blazerforum.com/forum/attach...ine=1362537197 Can't believe I got it so cheap lol. Might be trading my DD-1 for the Nav unit. Ordered my D3400 today too. No love, guess I need to up my game... |
They definatly wanted good cooling on that DP. Can't wait to see more. Goodluck
|
2 Attachment(s)
Originally Posted by SplDuck
(Post 571714)
They definatly wanted good cooling on that DP. Can't wait to see more. Goodluck
Starting battery https://blazerforum.com/forum/attach...ine=1362959922 New work boots, 13 double wide. Like wearing hooker heels. https://blazerforum.com/forum/attach...ine=1362959922 |
6 Attachment(s)
Here's a small update. Pulled the stock battery to drop my D3400 in. Had to mod the battery tray. Pain in the ass using dremel cutting wheels lol. Repainted it. I went to start my big three and just getting ready to start running wire in general. Well couldn't find my hammer, roommate moved it and didn't tell me. Took almost an hour to find. I was pissed. I ended up breaking my hammer crimper once I found it. Got one crimp.... I didn't like the diyma 0ga terminals really... I also pulled the front differential actuator while the battery was out, to hopefully find my 4wd issue and I did.
Stock :( https://blazerforum.com/forum/attach...ine=1364358982 Decent size difference. https://blazerforum.com/forum/attach...ine=1364358982 Modding the tray https://blazerforum.com/forum/attach...ine=1364358982 Took way too long with a dremel tool... https://blazerforum.com/forum/attach...ine=1364358982 Nice fit :) https://blazerforum.com/forum/attach...ine=1364358982 That's why it won't lock in :( https://blazerforum.com/forum/attach...ine=1364358982 I'm feeling my motivation come back lol. |
Holy balls, I'm so jealous right now it hurts. :icon_wink: I can't wait to see how this turns out.
|
2 Attachment(s)
More updates. Crimpers won't be here until Tuesday, which I'm still pissed about... I planned getting my big three and few runs done today... But good news is, my MechMan elite 370a alt will be here Tuesday. Which I paid for on Wednesday, so that's what I call service! I'm excited. So I'll be busy this week. Next weekend, some wood should be going in :)
Also I got my avh-x5500bhs in. It's an amazing unit. No homo. Just on stock speakers, the sound is night and day different. Streaming bluetooth audio is great. CD is even better. I still need yo ground the parking brake line, hook up the "reverse light" wire, backup camera and aux cable lol. I'm really liking it so far. Had to scrap all the dash kit crap. I picked up some metal strapping or plumbers tape. I didn't like how flimsy it was. I found some "J-hook" straps we on wood poles to do cable drops. It about three times as thick, so much more strength. I only took two pics. I was just focused haha. Kind of temped with wire nuts. Eventually I'll solder and shrink tube it. You can see where I added some bolts to low portion of the opening. Secured in with epoxy. Hopefully they stay in when I unbolt them lol. https://blazerforum.com/forum/attach...ine=1365368792 I don't feel like build the dash bezel, so mustache tape to cover up the mounting. https://blazerforum.com/forum/attach...ine=1365368792 |
2 Attachment(s)
I got under the truck, cleaned/scraped the frame treated with the rust/paint **** and it looks way fawking better. Painted the receiver hitch, tail pipe and bomb canned the finder wells. I can say it looks way better. Still gotta do the spare tire mount and get the whole truck painted but oh well.
yuk https://blazerforum.com/forum/attach...ine=1365368862 https://blazerforum.com/forum/attach...ine=1365368862 Fender flares and all that jazz too.... |
Originally Posted by Thogert
(Post 575797)
Holy balls, I'm so jealous right now it hurts. :icon_wink: I can't wait to see how this turns out.
I'm excited too. |
2 Attachment(s)
More updates. Crimpers won't be here until Tuesday, which I'm still pissed about... I planned getting my big three and few runs done today... But good news is, my MechMan elite 370a alt will be here Tuesday. Which I paid for on Wednesday, so that's what I call service! I'm excited. So I'll be busy this week. Next weekend, some wood should be going in :)
Also I got my avh-x5500bhs in. It's an amazing unit. No homo. Just on stock speakers, the sound is night and day different. Streaming bluetooth audio is great. CD is even better. I still need yo ground the parking brake line, hook up the "reverse light" wire, backup camera and aux cable lol. I'm really liking it so far. Had to scrap all the dash kit crap. I picked up some metal strapping or plumbers tape. I didn't like how flimsy it was. I found some "J-hook" straps we on wood poles to do cable drops. It about three times as thick, so much more strength. I only took two pics. I was just focused haha. Kind of temped with wire nuts. Eventually I'll solder and shrink tube it. You can see where I added some bolts to low portion of the opening. Secured in with epoxy. Hopefully they stay in when I unbolt them lol. Attachment 31797 I don't feel like build the dash bezel, so mustache tape to cover up the mounting. Attachment 31798 |
9 Attachment(s)
Woooo. More progress. My 10 ton crimpers and 370a MechMan alt came in today :) I'm freaking wore out. Everything took way longer than expected but oh well. Alt works great. Had a battery light for a second but it worked out. Looks like I'm almost charging at 15v. Got Three + and - leads to my front battery. Used that FA 00g wire. Which was a bitch. But it's silver tinned ofc!
Dem boxes :) https://blazerforum.com/forum/attach...ine=1365570374 couple goodies https://blazerforum.com/forum/attach...ine=1365570374 Received in less than a week! https://blazerforum.com/forum/attach...ine=1365570374 mmmmmm https://blazerforum.com/forum/attach...ine=1365570374 Bam! https://blazerforum.com/forum/attach...ine=1365570374 Top notch packaging https://blazerforum.com/forum/attach...ine=1365570374 Hmmmm https://blazerforum.com/forum/attach...ine=1365570374 It's a big bitch. Bigger than I thought. https://blazerforum.com/forum/attach...ine=1365570374 Big ole dies https://blazerforum.com/forum/attach...ine=1365570374 |
7 Attachment(s)
Old weak alt
https://blazerforum.com/forum/attach...ine=1365570464 Beef https://blazerforum.com/forum/attach...ine=1365570464 Meh pic https://blazerforum.com/forum/attach...ine=1365570464 More meh https://blazerforum.com/forum/attach...ine=1365570464 Zip ties ftw! https://blazerforum.com/forum/attach...ine=1365570464 Might redo the run that's kind of exposed, but it's tight. https://blazerforum.com/forum/attach...ine=1365570464 One of my pre crimps of the diyma 0ga terminals. They'll probably like 3/0 or 4/0 lol https://blazerforum.com/forum/attach...ine=1365570464 |
7 Attachment(s)
Hard to tell, but it's serious.
https://blazerforum.com/forum/attach...ine=1365570518 Them grounds. https://blazerforum.com/forum/attach...ine=1365570518 Plumbing. https://blazerforum.com/forum/attach...ine=1365570518 Not too bad. https://blazerforum.com/forum/attach...ine=1365570518 Down below! https://blazerforum.com/forum/attach...ine=1365570518 I like it. https://blazerforum.com/forum/attach...ine=1365570518 Success. https://blazerforum.com/forum/attach...ine=1365570518 |
Good gawd that's a serious crimper. As someone who has tried to crimp wire like that with vice grips (unsuccessfully) I am very impressed with those crimps.
|
I really like your fender flares.. what brand?
|
Those would be zr2 flares.
|
where did you get those battery terminals at?
|
Originally Posted by Thogert
(Post 578792)
Good gawd that's a serious crimper. As someone who has tried to crimp wire like that with vice grips (unsuccessfully) I am very impressed with those crimps.
Originally Posted by 210cnj
(Post 578817)
I really like your fender flares.. what brand?
Originally Posted by richphotos
(Post 578834)
Those would be zr2 flares.
Originally Posted by bryanbc
(Post 578947)
where did you get those battery terminals at?
Store Awes guy builds them. He's building my busbars for my for when I get my fifth D3100 :) |
8 Attachment(s)
More updates.
Got 8 runs of 0ga front to back done. Have a few more things I want to do to become more comfortable with it. It was bitch to run on the exhaust side plus the 4wd. Nothing is easy in this mofo. Getting it stripped down https://blazerforum.com/forum/attach...ine=1367294352 Foam https://blazerforum.com/forum/attach...ine=1367294352 Cutting it open! https://blazerforum.com/forum/attach...ine=1367294352 Yes, they're as long as they look. http://i275.photobucket.com/albums/j...ps6e584c89.jpg Ground runs https://blazerforum.com/forum/attach...ine=1367294352 One of those runs is strait off the alt. https://blazerforum.com/forum/attach...ine=1367294352 https://blazerforum.com/forum/attach...ine=1367294352 Missing the inner fender well on this side well splash part of it... Soooo, KOB zip ties and mustache tape it is. https://blazerforum.com/forum/attach...ine=1367294352 Yes it looks horrible right now. https://blazerforum.com/forum/attach...ine=1367294352 |
7 Attachment(s)
More to do. Needed to up grade the highs bad.
https://blazerforum.com/forum/attach...ine=1367294443 Putting the tweeter in the stock location. https://blazerforum.com/forum/attach...ine=1367294443 This was fun. The tweeter wires are the nice blue ones. https://blazerforum.com/forum/attach...ine=1367294443 The stocks are a little beat up. https://blazerforum.com/forum/attach...ine=1367294443 Much better :) https://blazerforum.com/forum/attach...ine=1367294443 Got that redneck going. https://blazerforum.com/forum/attach...ine=1367294443 And some redneck rappin :) https://blazerforum.com/forum/attach...ine=1367294443 I'm loving how the comps sound so far! Sorry for the delayed responses and updates. But I have a temp sub stage in the works. two of my 18s on about 5k |
Cool build. I'm not going as crazy as that, but maybe (4) 15's. I do have a couple of questions for you:
-Did you have to regulate the alternator? Is the 15+ volts your gauge is reading bad for it? -How does the foam work? Does it make it more solid sounding and not echoey? -Are you going to "line" the rest of the interior with some sort of sound deadener? Have you ever used just rubberized undercoating? Or liquid bed liner? Can't wait to see the finished product...may have to ride over and look at it in person. I'm only about 2 hours away. |
Originally Posted by 94_FoeDoe
(Post 582738)
Cool build. I'm not going as crazy as that, but maybe (4) 15's. I do have a couple of questions for you:
-Did you have to regulate the alternator? Is the 15+ volts your gauge is reading bad for it? -How does the foam work? Does it make it more solid sounding and not echoey? -Are you going to "line" the rest of the interior with some sort of sound deadener? Have you ever used just rubberized undercoating? Or liquid bed liner? Can't wait to see the finished product...may have to ride over and look at it in person. I'm only about 2 hours away. For the alt, it has an internal regulator. My gauge only reads 14.1-14.2 I will say, I don't suggest charging higher than 14.8 daily. 15.5 is ok if you're doing a quick burp. The foam helps strengthen then panels and take some resonation out of it. Really helps more with strength though. Yes I will be adding a lot deadener. I'm a firm believer in adding the proper amount deadener. Most likely alpha damp and stinger roadkill expert. |
5 Attachment(s)
Got some updates.
Got my sexy busbars in :) https://blazerforum.com/forum/attach...ine=1369682458 Nice and clean https://blazerforum.com/forum/attach...ine=1369682458 FTMFW https://blazerforum.com/forum/attach...ine=1369682458 Driving around the old Six Flags in New Orleans. Pretty crazy. https://blazerforum.com/forum/attach...ine=1369682458 https://blazerforum.com/forum/attach...ine=1369682458 |
6 Attachment(s)
Inside one of the buildings
https://blazerforum.com/forum/attach...ine=1369682502 https://blazerforum.com/forum/attach...ine=1369682502 https://blazerforum.com/forum/attach...ine=1369682502 My GF and the Blazer looking around https://blazerforum.com/forum/attach...ine=1369682502 One of the stages https://blazerforum.com/forum/attach...ine=1369682502 DAEWOO FTMFW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! https://blazerforum.com/forum/attach...ine=1369682502 Got a new temp setup in. Probably only about 3k of real power. Subs barely move maybe an 1" peak to peak. Hopefully have more power for STC :) |
Yes I'm in dire need of deadener lol |
My same head unit and speakers. I switched tweeter plates left for right. Now they look like alagator eyes lookingback at me. Alton made mdf speaker pods and Ijust covered mine with bondo. How thats gonna work IDK.
|
Originally Posted by LeWhite
(Post 586173)
My same head unit and speakers. I switched tweeter plates left for right. Now they look like alagator eyes lookingback at me. Alton made mdf speaker pods and Ijust covered mine with bondo. How thats gonna work IDK.
|
2 Attachment(s)
Cleaned up my cluster fawk. Keep in mind this is a temporary setup. So I'm not cutting the wires to fit right now. Also the the project db is "backwards" since I had them setup for when I put the batteries to the back. Then it won't be backwards :) I need more amps so I can fill up the holes!
The before https://blazerforum.com/forum/attach...ine=1369977322 The after https://blazerforum.com/forum/attach...ine=1369977322 I'll rerun some more wire before scrapin to clean it up a little bit. But I don't to waste a lot on a temp gig. I'm also hoping to double power for it too. I'm super happy with the busbars. Perfect bevel on the inlets, everything clean and smooth. This is my fourth purchase so far. Each one has been great. Also mechman and xs power ftw :) zero drop at idle! |
9 Attachment(s)
So, I've added more power, quite a bit more. Sound deadener, more bracing internally. Changing my front stage up a little for scrapin too. I've also added some air shocks.
Getting ready for surgery. https://blazerforum.com/forum/attach...ine=1371435701 https://blazerforum.com/forum/attach...ine=1371435701 Broke a window track bolt trying to work on the doors. https://blazerforum.com/forum/attach...ine=1371435701 More tweeters https://blazerforum.com/forum/attach...ine=1371435701 https://blazerforum.com/forum/attach...ine=1371435701 Sealing up the windows. I'll clean the urethane up later. https://blazerforum.com/forum/attach...ine=1371435701 https://blazerforum.com/forum/attach...ine=1371435701 9PM and still hot as fawk https://blazerforum.com/forum/attach...ine=1371435701 Super amazing custom brackets. https://blazerforum.com/forum/attach...ine=1371435701 |
10 Attachment(s)
Left the rear glass release solenoid release plug off when I put the tailgate back together. So I had to squeeze beside the box. Well I forgot a trim clip on the interior of the truck. I was in too deep before I realized.
https://blazerforum.com/forum/attach...ine=1371436383 A little blood lol. https://blazerforum.com/forum/attach...ine=1371436383 The culprit https://blazerforum.com/forum/attach...ine=1371436383 Making some new jumpers for the subs. https://blazerforum.com/forum/attach...ine=1371436383 https://blazerforum.com/forum/attach...ine=1371436383 Tailgate https://blazerforum.com/forum/attach...ine=1371436383 https://blazerforum.com/forum/attach...ine=1371436383 Ripped the roof brace glue crap. https://blazerforum.com/forum/attach...ine=1371436383 https://blazerforum.com/forum/attach...ine=1371436383 https://blazerforum.com/forum/attach...ine=1371436383 |
4 Attachment(s)
The air shocks. They're rated from 25-200psi. Right now I'm sitting at 75ish. Almost perfect level and rides great. I had to pull some wire down but I'll button that up later.
New air shocks, old factory bilstiens. Still had some left in them too. Attachment 31705 It's hard to tell, but I gained almost 3" in this pic. I'll do a proper before and after soon. https://blazerforum.com/forum/attach...ine=1371437501 https://blazerforum.com/forum/attach...ine=1371437501 Couldn't think of another spot and I didn't feel like drilling. https://blazerforum.com/forum/attach...ine=1371437501 |
4 Attachment(s)
The air shocks. They're rated from 25-200psi. Right now I'm sitting at 75ish. Almost perfect level and rides great. I had to pull some wire down but I'll button that up later.
New air shocks, old factory bilstiens. Still had some left in them too. Attachment 31701 It's hard to tell, but I gained almost 3" in this pic. I'll do a proper before and after soon. Attachment 31702 Attachment 31703 Couldn't think of another spot and I didn't feel like drilling. Attachment 31704 |
Originally Posted by armykyle1
(Post 586082)
Got some updates.
Driving around the old Six Flags in New Orleans. https://blazerforum.com/forum/attach...ine=1369682458 |
All times are GMT -5. The time now is 09:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands