The green hornet project
#21
nope ran them through a roof rack bolt hole ,under the roof liner and down the left pillar
#22
Any chance I could get a picture of how you mounted the lights to the rack itself? I have that same rack and I'm still deciding how I want to put lights on it.
#23
I`m at work but I drilled holes right through the lower cross bar. 1/2 inch
#24
new rims
new to me, these them after i prepped them
2 coats of self etching primer
2 coats duplicolor wheel paint black and 2 coats of gloss
getting tires in a few weeks, will give the paint time to harden fully
2 coats of self etching primer
2 coats duplicolor wheel paint black and 2 coats of gloss
getting tires in a few weeks, will give the paint time to harden fully
#25
looks good! cant wait to see them on
#26
#27
those look really good..trying to decide what i want to do with mine.
Rick
Rick
#28
shoulda just replaced the valve stems instead of masking them. cheap and easy
#29
Stole this idea from rexmburns. D rings
#30