So after 6 months I finaly have the new remaned engine in and wanting to start the mods. Ive only took off the moldings and debadged it so far.
Next plan is soft 8's.
Soon I hope to have a 2 inch body lift.

Pictues will be up soon!

 

nice cant wait for those pictures =)

 

Well im new at this so this link will have to do for now until someone can help me out with the picture situation. http://i1222.photobucket.com/albums/...ket_20857_.jpg

 

whallaaaaaaaaaaaaa u welcome

 

Well thanks man but can you tell me how to do it now lol

 

When you're replying to a thread (or creating a new one for that matter) click the yellow box with a mountain in it. Enter the URL you posted above (or the new one for each picture) in the box that pops up, and click OK. It'll add it right to the thread and you're all set.

 

Thank you!!

So I was thinking about getting these wheels. http://www.jegs.com/p/JEGS-Performan...72411/10002/-1 I have a 4x4 and the back spacing is 3.75 how far will the stick out of the fenders?

 

Stock backspacing on a 4wd is 6 inches, therefore a backspacing of 3.75in would make the rims stick out 2.25in. It kinda gives it a meaner look IMO

 

Alright thanks. Im just hoping it doesnt stick so far out you can see my whole tire.

 

So when I started it up I would step on the gas and it would bog down so I bought a canof MAF cleaner and cleaned it up. No more boging down I also forgot to add: I have a dual head unit, 8 inch pioner sub and a 400 watt dual amp. I like to hear my music so perfect set jp gor me. Rim and tire situation... I have brand new goodyear a/t's 235/75/r15 on the blaz right now