Hec's 99 2dr Jimmy Build
Thread Starter
|
Starting Member
Joined: Sep 2011
Posts: 100
From: London ON
Correct except its all 4 bolts, they only screw in a few threads which I don't get as they came out easy
Lol and ya chrome, I thought about painting it but wanted to see it on the truck first then probably photoshop black to get a rough idea on the look
Lol and ya chrome, I thought about painting it but wanted to see it on the truck first then probably photoshop black to get a rough idea on the look
Thread Starter
|
Starting Member
Joined: Sep 2011
Posts: 100
From: London ON
was a bitch but i got the threads cleaned out and bolts back in and since it needs an alignment i cranked the Tbar a inch to level the truck out, and pretty sure i have a saggy tbar on the passenger side as the bolt is cranked in more
and since i still havent re-installed my hitch from the body lift i decided to clean it up first, need to decided between painting it or spraying it with bedliner
and since i still havent re-installed my hitch from the body lift i decided to clean it up first, need to decided between painting it or spraying it with bedliner
Thread Starter
|
Starting Member
Joined: Sep 2011
Posts: 100
From: London ON
this is the only pic i have of the mounts, it uses the 2 inner bumper bolts(i needed to buy longer ones) and at the bottom it mounts to the frame using the bolts for front skidplate
if you want some better pics ill take a couple when i go outside later, also my bottom mounts are altered for the 2" body lift
if you want some better pics ill take a couple when i go outside later, also my bottom mounts are altered for the 2" body lift
Thread Starter
|
Starting Member
Joined: Sep 2011
Posts: 100
From: London ON
this should help
and i swung by a friends shop and he had these, not sure if i want them but i took them so i can toss them on the truck and see what they look like... if i keep them $20 and ill probably crack them open and sand that fake CF **** off
and i swung by a friends shop and he had these, not sure if i want them but i took them so i can toss them on the truck and see what they look like... if i keep them $20 and ill probably crack them open and sand that fake CF **** off
Last edited by _HeC_; Feb 13, 2012 at 09:46 PM.
Thread Starter
|
Starting Member
Joined: Sep 2011
Posts: 100
From: London ON
well time to bring this back up
got these tails but dont think i like them as they sit(might crack them open) and the hitch turned out great IMO
did a little surgery as the bumper rubbed and i needed to toss some stitches on it
and a little urban wheeling!! haha
as you can see back to stock tails, will tint these ones
got these tails but dont think i like them as they sit(might crack them open) and the hitch turned out great IMO
did a little surgery as the bumper rubbed and i needed to toss some stitches on it
and a little urban wheeling!! haha
as you can see back to stock tails, will tint these ones
Thread Starter
|
Starting Member
Joined: Sep 2011
Posts: 100
From: London ON
those made for a frustrating rear shock swap but there in
i clearly had to go for a ride afterwards to see how it felt....
and new tools!! lol $330 normally but $100 taxs in so i couldnt say no, already had some of the stuff but whatever... hopefully the air hammer helps with my shackle bolts
4hi is great but 4lo not so much
im guessing this corrosion at the TCCM isnt helping
Last edited by _HeC_; Jul 19, 2012 at 04:06 PM.
was kinda shocked i fit this in the jimmy WITH 2 12s and my luggage
