Project: Sharlet (aka Risen Phoenix)
Thread Starter
|
Starting Member
Joined: Oct 2010
Posts: 162
From: Fall Branch, TN
okay got a choice here...
1) go for the whole wiring harness for around 250$
2) cut and splice the charred wires
3) use electrical tape and patch it...or use Liquid Tape
my vote is for the 2nd one...any advice?
1) go for the whole wiring harness for around 250$
2) cut and splice the charred wires
3) use electrical tape and patch it...or use Liquid Tape
my vote is for the 2nd one...any advice?
BF Veteran
Joined: Aug 2008
Posts: 3,209
From: Sudbury, ON, Canada
Replace the burn wiring and have at'er with shrink tubing. Just make sure you use the right guage of wiring and your soldering is good lol. It'll be time consuming but you'll save lots of cash.
Oh, and *Name changed as per PM request*
Oh, and *Name changed as per PM request*
Thread Starter
|
Starting Member
Joined: Oct 2010
Posts: 162
From: Fall Branch, TN
after months of looking and scouring everywhere to find parts i finally found something....
this project is finally on the road to recovery
new 2.8L wires and all and an upgrade to a 5sp. tranny
this project is finally on the road to recovery
new 2.8L wires and all and an upgrade to a 5sp. tranny
