Detailing Discuss detailing your Blazer within.

cleaning engine bay

Old Aug 10, 2011 | 11:41 PM
  #11  
MisterBrusso's Avatar
Thread Starter
|
Beginning Member
Joined: Jul 2011
Posts: 24
From: Texas
MisterBrusso is on a distinguished road
Default

yea i have seen under the hood...ive seen cars get f'cked up from just sprayin liek crazy... be safe and dont risk it 98chevyblazer
 

Last edited by MisterBrusso; Aug 10, 2011 at 11:44 PM.
Old Aug 11, 2011 | 08:42 AM
  #12  
01BlackBeauty's Avatar
Starting Member
Joined: Jun 2010
Posts: 133
From: Washington State
01BlackBeauty is on a distinguished road
Default

I would think using brake cleaner on a really dirty engine bay could become quite expensive in a hurry. Simple Green or Purple Power does an excellent job on grease. Spray it on, agitate the heavily soiled areas with a brush, let it sit for a minute then rinse it off with a free flowing garden hose. That way you prevent the spray from going where it's not wanted. As previously mentioned, cover the alternator, throttle body and distributor. Soak the water up from pockets on the engine with a rag.
 
Old Jan 1, 2013 | 02:20 AM
  #13  
daddyx2's Avatar
New Member
Joined: Aug 2011
Posts: 66
From: southern maine
daddyx2 is on a distinguished road
Default

Before and after pics anyone?
 
Old Jan 13, 2013 | 03:32 PM
  #14  
OlBoothBoy's Avatar
Starting Member
Joined: Jan 2013
Posts: 3
OlBoothBoy is on a distinguished road
Default

im not exactly sure what its called but they got spray at autozone you can buy specifically for that.. you just spray it let it sit and wash it off, after you cover your dist. cap, alternator, etc..
 
Old Jan 13, 2013 | 04:30 PM
  #15  
rexazz2's Avatar
Super Member
Joined: Jan 2013
Posts: 1,110
From: KW Ontario
rexazz2 will become famous soon enough
Default

Not sure if what you guys call purple power is the same as castrol super clean
I oversprayed the windshield with super clean and it etched the glass
 
Old Feb 5, 2013 | 10:10 PM
  #16  
1sttimejimmyowner's Avatar
Super Member
Joined: Apr 2012
Posts: 1,279
From: Port huron,Mi
1sttimejimmyowner is on a distinguished road
Default

For stubborn greasy areas I use a good brand of oven cleaner,Easy off works good.Dont use on painted surfaces unless you want to do a touch up paint job.I let it soak on a hot or warm engine for about 15-20 minutes then use the power sprayers at the car wash.I have been using this method for years.
 
Old Jan 28, 2014 | 09:39 AM
  #17  
daanbc05's Avatar
Beginning Member
Joined: Jan 2014
Posts: 39
From: Palm Beach Florida
daanbc05 is on a distinguished road
Default

In the "dollar store" by me they sell this stuff thats called (AWESOME) it's orange in color. This stuff is great on everything. I have used it to get stains out of carpet, oil stains on the driveway, I sprayed the whole engine bay, let sit for 10 min. then respray again. Then hit it with the hose, all washes away. I just noticed walmart is starting to carry it to. But for more $$. It's only a buck at the dollar store.
 
Old Apr 19, 2014 | 02:12 PM
  #18  
Robt77's Avatar
Starting Member
Joined: Apr 2014
Posts: 133
Robt77 is on a distinguished road
Default electronics

I used the car wash a few years ago, after covering the distributor, coil and throttle body, then drove it dry. Everything was fine the whole day. the next morning it was missing real bad. I did a quick tune up, plugs wires, cap and rotor, and everything was fine. I haven't attempted to was an engine since. I was thinking about one of those steam clean services. Anybody ave an opinion on that.
 
Old Dec 7, 2014 | 09:48 PM
  #19  
TomB205's Avatar
Beginning Member
Joined: Nov 2014
Posts: 11
TomB205 is on a distinguished road
Default

the whole thing is electrical parts... can I just turn a garden hose on it? Everything in my engine compartment is covered in a layer of mud.
 
Old Dec 27, 2014 | 02:47 PM
  #20  
moosehauler05'blaz's Avatar
New Member
Joined: Jan 2014
Posts: 60
From: Burlington Ontairio Canada
moosehauler05'blaz is on a distinguished road
Default

Originally Posted by TomB205
the whole thing is electrical parts... can I just turn a garden hose on it? Everything in my engine compartment is covered in a layer of mud.
I myself don't worry about getting the whole thing fully clean in 1 wash But i do run the truck till warm/hot and head over to Canadian Tire / Auto zone / pep boys any auto parts store that sells engine degreaser and get a bottle of it head over to the car wash and spray it on till its empty then close the hood wash the outside of the truck 10 mins later i hit the engine bay with soap and water Never had a stall issue i would say i washed it 2 times the first week then 1 more time the following week and grabbed a rag and baby bottle brush and got all the nooks and crannies now its a wash once a month She looks showroom new under the hood Don't know if the pic below will up load but this was just after the 2nd wash i did ..I later had sanded and buffed the A/C lines. Painted the A/C front plate and ALT, housing and face
 
Attached Thumbnails cleaning engine bay-1014336_10154035291640454_1314625216_n.jpg  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
matt92
General Chat
12
Jan 11, 2011 09:43 PM
2oooBlazer
Engine & Transmission
1
Oct 31, 2009 09:31 PM
964x4ND
2nd Generation S-series (1995-2005) Tech
3
Nov 28, 2008 08:28 AM
djdrew010
General Chat
6
Sep 4, 2008 07:30 PM
kiwiblazer
General Chat
4
Apr 12, 2008 05:44 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:20 AM.