1983 two wheel drive, v6 automatic transmission?
#1
Thread Starter
Join Date: Feb 2008
Location:
Posts: 13

What automatic transmission is in my 1983 s10 blazer 2 wheel drive v6? Also what other transmission will fit with no alteration?
I was told that is was smaller than a 350 trans.
Thanks,
Paul
I was told that is was smaller than a 350 trans.
Thanks,
Paul
#2
700r4 is behind it, 700r4 out of 1982-1988 s-series 2wd fit with no mods.
#3
Thread Starter
Join Date: Feb 2008
Location:
Posts: 13

Thanks, that is not the 700 trans that is in Suburbans is it? Is it a physically smaller trans than a 350?
Are they hard to find?
Reason is mine is slipping and I might need another one.
Thanks again,
Paul
Are they hard to find?
Reason is mine is slipping and I might need another one.
Thanks again,
Paul
#4
Thread Starter
Join Date: Feb 2008
Location:
Posts: 13

I checked the throttle valve cable and it was lose. Is it supposed to go back on its own at low throttle or stay lose? Mine is lose and when I pull it all the way it just stays there.
#5
Same tranny as the V8s internal, tranny housing different. Your talking a 90 degree bellhousing (4.3, v8) compared to a 60 degree (2.8). I've heard you can use the auto out of a 3.1/3.4 camaro you have to change the tail shaft tho. I don't know for a fact if that true.
your cable is fine
your cable is fine
Thread
Thread Starter
Forum
Replies
Last Post
mirrorimij
2nd Generation S-series (1995-2005) Tech
3
06-08-2019 03:34 PM
mxpxpunkrock1987
1st Generation S-series (1983-1994) Tech
0
02-04-2011 01:42 PM
UndeadPrincess
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
4
01-28-2011 11:25 PM
lizzj70
Steering, Suspension & Drivetrain
2
06-23-2010 06:57 PM







