Blazer Forum - Chevy Blazer Forums

Blazer Forum - Chevy Blazer Forums (https://blazerforum.com/forum/)
-   Engine & Transmission (https://blazerforum.com/forum/engine-transmission-35/)
-   -   4wd problem (https://blazerforum.com/forum/engine-transmission-35/4wd-problem-95688/)

Nixoncc 11-23-2017 05:02 AM


Originally Posted by error_401 (Post 682733)
2005 Dakota manual for NV233 electrically actuated reads:

4HI to 4LO or 4LO to 4HI
NOTE: When shifting into or out of 4LO some gear
noise may be heard. This noise is normal and is not
detrimental to the vehicle or occupants.
Shifting can be performed with the vehicle rolling 2-3
mph (3-5 km/h) or completely stopped.

The 1991 - 1994 with the electric NV233 with dash electrical switch are the same.

BTW:
Switching the HI-LO range should be accomplished only with the transmission in NEUTRAL.

TCCM will sense it and flash or do nothing.

The thing is that I can hear the 4lo tries to engage but then returns to the 4hi in a few seconds.
This is in neutral

error_401 11-24-2017 04:30 AM

BTW

Can you give us the vehicle information?

Year, Make, Model, still not sure about which Blazer we are talking.

Nixoncc 11-24-2017 06:42 AM


Originally Posted by error_401 (Post 682778)
BTW

Can you give us the vehicle information?

Year, Make, Model, still not sure about which Blazer we are talking.

Sure!
It's a 99 Blazer LT

LesMyer 11-24-2017 08:31 AM


Originally Posted by Nixoncc (Post 682783)
Sure!
It's a 99 Blazer LT

As I described is the preferred method for either NP233 or NP236. Also included here is a tip if it is a NP233 (3-button) and won't go into 4lo.

https://cdn.dealereprocess.net/cdn/s...001-blazer.pdf

I'm done


All times are GMT -5. The time now is 11:05 AM.


© 2024 MH Sub I, LLC dba Internet Brands