I need Help with 89 S10 Blazer VSS Wiring
#1
I need Help with 89 S10 Blazer VSS Wiring
I just got the truck in a trade recently. While trying to diagnose the Speedo issue i noticed that the VSS wires have been snipped(why is beyond me). Can someone help me in getting these wires connected back where they belong
This is the harness that connects to the sensor
this is a second harness about 7 inches away from it, not sure what it goes too but it has a cut purple wire also. There is a tan wire and a green wire on that one too but those 2 are not cut
This is the harness that connects to the sensor
this is a second harness about 7 inches away from it, not sure what it goes too but it has a cut purple wire also. There is a tan wire and a green wire on that one too but those 2 are not cut
Thread
Thread Starter
Forum
Replies
Last Post
Tvojtko
1st Generation S-series (1983-1994) Tech
1
03-06-2013 07:40 PM
killerv8sten
Engine & Transmission
3
02-11-2012 10:14 AM
87blazerswapped
1st Generation S-series (1983-1994) Tech
4
11-19-2011 02:03 PM
fbuchanan
Engine & Transmission
1
05-24-2011 01:57 PM
Doug W
2nd Generation S-series (1995-2005) Tech
1
03-08-2011 07:24 PM