Low Compression-- need help!
Moderator
Joined: Mar 2009
Posts: 8,453
From: Belleville, Michigan
The chain is fine.
Remove both rocker arm covers and loosen all rocker arm nuts. Manually align the crankshaft dampener just like in post #9 above. Then manually rotate the crankshaft clockwise 57-63 degrees, (60 degrees is desired). Torque each rocker arm nut to 18 foot pounds. Put it back together and fire it up.
Remove both rocker arm covers and loosen all rocker arm nuts. Manually align the crankshaft dampener just like in post #9 above. Then manually rotate the crankshaft clockwise 57-63 degrees, (60 degrees is desired). Torque each rocker arm nut to 18 foot pounds. Put it back together and fire it up.
Thread
Thread Starter
Forum
Replies
Last Post
DaddysBlazer
Engine & Transmission
3
Aug 21, 2011 08:19 PM