Engine & Transmission Post your Engine and Transmission related problems here.

p0171/p0300

Thread Tools
 
Search this Thread
 
  #11  
Old 09-05-2008, 11:39 PM
97ssblazer's Avatar
Starting Member
Thread Starter
Join Date: Aug 2008
Location: Michigan
Posts: 111
97ssblazer is an unknown quantity at this point
Default RE: p0171/p0300

no def didnt help... pulled the plugs and there hit... wire 6 was almost completely broken... and now is lol...
 
  #12  
Old 09-14-2008, 04:18 PM
97ssblazer's Avatar
Starting Member
Thread Starter
Join Date: Aug 2008
Location: Michigan
Posts: 111
97ssblazer is an unknown quantity at this point
Default RE: p0171/p0300

finally fixed it... all new upper intake gaskets... 3 new 02's all warrantied only really needed 1.. new plugs and wires only because i broke one taking it off the plug... The control module went bad awhile back making the truck run REALLY rich.. i drove it 90 miles like that and it fouled the plugs and 02's... i changed my temperature switch while i was under there because it was very old.. the B1S1 O2 was so fouled it was not even responding.. after changing the gaskets P0133 and P1133 popped up... so i pulled my O2's and they looked worse than my plugs now with new O2's it runs fine again.. only been 20 miles so well see... im gonna change my MAP sensor just beacuse it under warranty and its covered by soot as well.....
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
melstal
2nd Generation S-series (1995-2005) Tech
2
03-30-2015 02:18 PM
RandyRhoadsFan82
2nd Generation S-series (1995-2005) Tech
5
11-14-2013 10:52 PM
huds
2nd Generation S-series (1995-2005) Tech
13
04-06-2013 09:44 PM
ICEMAN616
2nd Generation S-series (1995-2005) Tech
11
08-24-2011 11:40 AM
hebelracing38
2nd Generation S-series (1995-2005) Tech
4
06-11-2010 04:00 PM



Quick Reply: p0171/p0300



All times are GMT -5. The time now is 05:51 PM.