OK, I just bought an 96 blazer that needed new head gaskets, not a problem, done head gaskets before. So I'm new to your community
However, while pulling the distributor I broke a round wire harness/connector just under the distributor on the drivers side connected to a sensor I don't know what it is. Any idea's?
Any assistance would be greatly appreciated

 

Knock sensor....

 

Not the knock rod sensor, I know where that is, one of my buddies suggested the oil sending unit, does that sound possible?
Thanks

 

Yeah, oil sending unit is on passenger side of motor

 

it's the oil sending unit - its right below the dist - center of the block just a little back from the dist shaft

 

Thanks for the help guys I really do appreciate it. I looked up the oil pressure sending unit on rockauto and sure enough that looks like it.

Thanks again for the assist.