83 GMC JIMMY electric motor
Thread Starter
|
Beginning Member
Joined: Aug 2010
Posts: 20
From: New Mexico
83 GMC JIMMY electric motor
About a week ago, my driver side electric motor went out, or at least I think this is the problem. The problem initialy occurred about six weeks prior, but a few days later the window started working again and hasn't been a problem, until now.
This past weekend I pulled off the door panel and didn't see anything obvious. I tested the switch and verified I had power to both sides of the switch. I then removed the wires connecting to the switch that control the windows and transposed them. I didn't get either window to operate.
Put the wires back to their original places. I'm now going to buy a switch and HOPE like hell it the switch. If not, I'll have to replace the electric motor.
I would like to know if anyone here has any knowledge or pics they could post. My window is about 90% rolled down. According to what I've read, this process needs to begin with the window rolled up. Any advise is appreciated.
This past weekend I pulled off the door panel and didn't see anything obvious. I tested the switch and verified I had power to both sides of the switch. I then removed the wires connecting to the switch that control the windows and transposed them. I didn't get either window to operate.
Put the wires back to their original places. I'm now going to buy a switch and HOPE like hell it the switch. If not, I'll have to replace the electric motor.
I would like to know if anyone here has any knowledge or pics they could post. My window is about 90% rolled down. According to what I've read, this process needs to begin with the window rolled up. Any advise is appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
pothole987
2nd Generation S-series (1995-2005) Tech
1
Oct 5, 2010 07:35 PM
punx.inc
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
2
Dec 25, 2007 12:07 AM
