I am replacing the doors on my 1984 K5 (rusted out). I got a great deal on a pair but they have power windows and locks and I don't have any of that wiring because mine was all manual. Does anyone know or have a diagram of the wiring? I'm trying to figure out which wires I need to hook up to get the windows working. The locks would be great but not a big deal.
Thanks in advance.
Jeff

 

This is the best I could do (see attached). There isn't much to it, but you do have to run wires from one side to the other. Hopefully the doors come with the wiring at least through to under the dash.

 

Thank you. Fortunately the doors were already wired. II removed them so I cut the off a foot or so under the dash so I'd have plenty of wire to figure it out. Thanks again this will really help me out.