Any picture/info requests?
#1
Any picture/info requests?
Since I have the Sonoma and S10 completely torn down, I thought I'd check to see if anyone would like a picture or info about anything that might not be easily accessible under normal circumstances.
So let me know if there's anything you've been curious about or need to know and I'll do my best to get a picture or help out if I can.
Keep in mind these are 2000 & 2001 pick ups, so some of the interior stuff I won't be able to help out with but otherwise it shouldn't be a problem.
So let me know if there's anything you've been curious about or need to know and I'll do my best to get a picture or help out if I can.
Keep in mind these are 2000 & 2001 pick ups, so some of the interior stuff I won't be able to help out with but otherwise it shouldn't be a problem.
#2
You know what would be totally awesome and help me out amazingly? A picture of the routing of the evap line that runs from the intake manifold to the charcoal canister. I've got diagrams that show the line leaving the charcoal canister and leaving the purge solenoid on the manifold but the area in between is a great unknown. If I have to reach around blindly I'd at least like to have an idea of where to reach.
#3
I'll see what I can get for you, the blazer canister is in a different spot so it won't be completely accurate but should give you an idea.
Edit:
Okay, I don't know how much this is going to help. No easy way to get pictures of the lines.
Theres the large hose that's shown in the pic that goes to a sensor I'm guessing. Don't know where that will be on the blazer.
Other wise there's the two metal lines coming out of the canister, one goes directly to the fuel pump assembly and the other is grouped with the two fuel lines that runs to the engine. They all basically run on top of the frame.
Sorry I can't really help much more than that.
Edit:
Okay, I don't know how much this is going to help. No easy way to get pictures of the lines.
Theres the large hose that's shown in the pic that goes to a sensor I'm guessing. Don't know where that will be on the blazer.
Other wise there's the two metal lines coming out of the canister, one goes directly to the fuel pump assembly and the other is grouped with the two fuel lines that runs to the engine. They all basically run on top of the frame.
Sorry I can't really help much more than that.
Last edited by Jamaroon; 09-12-2013 at 08:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
rriddle3
New Member Area
0
09-19-2010 10:08 PM
swartlkk
Article Submissions/Discussions
0
12-06-2008 06:08 PM