Wondering if anyone here has converted a blazer to an auto cross race truck? If so, what mods are required and what would I be looking at? I'm thinking a 2wd 4.3 vrotec lowered w/ some fat short tires would be b!tchn.

 

its deff been done, many diff ways you can go about it best thing to do for this project is to just search the web

 

S10V8.com has some topics. I have seen some 4cyl short bed trucks do well in autox. What I have found is that the factory has screwed up the front suspension enough so you wont drive it over your head. The front is designed with a positive camber gain and non level lower contron arms; all screwey. Then guys raise the trucks, make it worse and complain of stuff going wrong.
Search: roll center and bump steer in you tube. There is a good demo on a radio control car. Also SC&C.com has some faq. Keep in touch.