General ChatChat about all things Blazer (and related vehicles). Off-topic stuff should be in the lounge, and all mechanical problems should be posted in the proper forum.
Your best bet is a junk yard. I would suggest you go to one that will let you pull it yourself. They can be fragile, and someone pulling a part that they don't need for themselves may not be too particularly gentle with it if you know what I mean lol
It's not hard to remove; pull the wiper arms, then the hole thing is held down with just phillips head screws and some pop-in clips, if memory serves me correct.
Last edited by blazen_red_4x4; 05-13-2019 at 09:27 PM.
How much difference between a 94 and 95 - LMC only goes as far as a 94 but it looks like they do offer the 94 cowl - it's a three piece unit, - two outer corner panels and a long center - center is around 99 bucks ....
Ted
I took mine off because of garbage in the space under it. Purchased from hardware some sticky type rubber stripe, pull the tape off one side and stick it on. Stuck between windshield and cowl in hopes of keeping garbage out of that area. Mine had traveled into evaporate area and smelled bad. Small inspection plate on that housing which I removed and took shop vacuum and placed a small half inch hose in two inch hose and was able to remove the trash. Was full of dirt and fir needles. Here I have to worry about iron wood needles which look like pine needles.