1993 s-10 blazer no power vortec 4.3
#1
1993 s-10 blazer no power vortec 4.3
engine runs great at idle but as soon as you gas it it starts to miss bad can get it to rev over 3000 r.m.p.s and got no check engine lite on can anyone tell me were to start to fix this problem thanks mike
#2
RE: 1993 s-10 blazer no power vortec 4.3
Mine was doing something similar, except it idled poorly as well. Check your plugs & wires. That was what was wrong with mine...I had melted a wire on the block.
#3
RE: 1993 s-10 blazer no power vortec 4.3
Any codes thrown?
#4
RE: 1993 s-10 blazer no power vortec 4.3
Just give yourself a general tune-up and change the spark plugs, mine was missing alot too. I just used some fuel injector cleaner, carborator cleaner and 6 new spark plugs and shes running great now.
#5
RE: 1993 s-10 blazer no power vortec 4.3
im going to try the plugs and wires i have allready put injecter cleaner in it also sprayed carb clean in the mouth of the injection seams to make it run better for a min or two
#6
RE: 1993 s-10 blazer no power vortec 4.3
Another guy with similar problems.
Thread
Thread Starter
Forum
Replies
Last Post
dnielsen@kpaccoldstorage.com
Engine & Transmission
2
11-09-2013 07:58 AM
fourplayinmi
1st Generation S-series (1983-1994) Tech
5
11-14-2008 12:17 PM
brokin8ball26
1st Generation S-series (1983-1994) Tech
3
09-03-2008 10:34 PM