Manual 4x4 shifter
#1
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
A bucket fell of the sidewalk as I was passing (at Highway Speed) and went under the truck. I pulled over and put the passenger side of the truck on the sidewalk so I could pull the bucket out. After pulling the bucket out, I got back in and tried to drive off now the 4x4 lever is extremely hard to move. What should I check first?
#2
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
You could check to see if the shift lever on the transfer case is bent at the end of the shift linkage. Or a bent linkage.
Thread
Thread Starter
Forum
Replies
Last Post
matthewp
Paint, Body, & Interior
4
04-04-2021 09:16 PM
jasedude
2nd Generation S-series (1995-2005) Tech
0
11-24-2010 04:03 PM
besthia
2nd Generation S-series (1995-2005) Tech
7
09-02-2009 06:12 PM