need help with cold air intake
#1
need help with cold air intake
okay so i got a air in take off ebay an i made a heat shild for it but now i need to make a braket to mount the air tube cause its just hangs there raddling around on everything if u have pics of a braket lol that would be great
Thanks Josh
Thanks Josh
#2
Ask and you shall receive :P
I bought some 3/4" x 1/2" corner braces with screws. Thats whats being used to hold the front part up. (screw is in hole thats already in the metal infront of the engine compartment. ) Through the heat shield i used 10-24 x 5/8 machine screws and for the rear brace i used a piece of metal that came with my cai. i drilled a hole in the other end and used a bolt through it.
I bought some 3/4" x 1/2" corner braces with screws. Thats whats being used to hold the front part up. (screw is in hole thats already in the metal infront of the engine compartment. ) Through the heat shield i used 10-24 x 5/8 machine screws and for the rear brace i used a piece of metal that came with my cai. i drilled a hole in the other end and used a bolt through it.
Thread
Thread Starter
Forum
Replies
Last Post
ravenhurst
2nd Generation S-series (1995-2005) Tech
15
04-26-2009 07:53 AM
dimmuborgir6nik6
Engine & Transmission
1
10-02-2008 06:51 AM