2000 blazer lift help!!!!
#1
2000 blazer lift help!!!!
im new 2 lifting. i have a 2000 blazer 4 door. an wanted to get a 6 inch suspension lift. an 33-35 inch tires. but idk if it will mess up my axels or something. i want a 6 inch suspension lift but dont want to buy new axels or drive train. what can i do that wont cost me alot.. i dont want a 2 inch body lift with 31 inch tires. plz help. ty
#2
RE: 2000 blazer lift help!!!!
If you want to go that high, you have to spend money. It is as simple as that. There are lifts that cost a bunch and retain the factory (restrictive) IFS (independent front suspension) setup and then there are SFA (solid front axle) swaps.
#3
RE: 2000 blazer lift help!!!!
35s = new axles.
#4
RE: 2000 blazer lift help!!!!
Cheapest way to get the amount of lift you are looking for is to buy a truck that already has the lift, preferably SFA for reliability of your front end.
Otherwise, plan on spending big $$$. That is the best answer I can give you.
Otherwise, plan on spending big $$$. That is the best answer I can give you.
#5
RE: 2000 blazer lift help!!!!
ORIGINAL: swartlkk
If you want to go that high, you have to spend money. It is as simple as that. There are lifts that cost a bunch and retain the factory (restrictive) IFS (independent front suspension) setup and then there are SFA (solid front axle) swaps.
If you want to go that high, you have to spend money. It is as simple as that. There are lifts that cost a bunch and retain the factory (restrictive) IFS (independent front suspension) setup and then there are SFA (solid front axle) swaps.
#6
RE: 2000 blazer lift help!!!!
ty..
so how about a 3" body lift an some 31" tires?? would that work?
so how about a 3" body lift an some 31" tires?? would that work?
#7
RE: 2000 blazer lift help!!!!
if you are wanting to run 31, it is as simple as either a 2" body lift or a 2" susp. lift. for me, i could clear 31 with no lift.
#8
RE: 2000 blazer lift help!!!!
If you were to combine the 2" suspension with a 2" body lift, what size tires can u fit? I have 33s off my 1/2 ton that i wanted to throw on my blazer, but they're to big to fit a stock blazer, i was looking for a decent lift for a good price. unfortunately the money i had saved up for a lift had to go to repairing my differential...1700$. I know body lifts are pretty cheap, but where can i find a good suspension lift for a good price.
99 S10 Blazer, 4dr 6cyl 4.3L
99 S10 Blazer, 4dr 6cyl 4.3L
#9
RE: 2000 blazer lift help!!!!
32 with little triming(what i am hoping on running) and 33 with a good bit of triming. how wide are the 33 off the full size?
and you really want to regear for either tire size. your stock 3.42 will handle 31 but32 are going to be pushing it with out regearing.
and you really want to regear for either tire size. your stock 3.42 will handle 31 but32 are going to be pushing it with out regearing.
#10
RE: 2000 blazer lift help!!!!
ORIGINAL: greenjimmy
32 with little triming(what i am hoping on running) and 33 with a good bit of triming. how wide are the 33 off the full size?
and you really want to regear for either tire size. your stock 3.42 will handle 31 but32 are going to be pushing it with out regearing.
32 with little triming(what i am hoping on running) and 33 with a good bit of triming. how wide are the 33 off the full size?
and you really want to regear for either tire size. your stock 3.42 will handle 31 but32 are going to be pushing it with out regearing.