hi i just put a performance accessories 3" BODY LIFT on my 95 4dr blazer i see a lot of people looking for answers on how to put on now the 2nd gen its not hard it does take time i work all together about 10 to 12 hours thats with no air tools and no broken bolts just get the instructions for the the 2" there a link on here for them. you dont need to buy the 2" kit all i had to do to make it work was to buy four more long bolts you need 12 there was only 8 and my neg batt cable was short but there was a bracket in the kit i used for that and moving your remote oil filter down you have to make some straight brackets for that just get a some flat 1" by 3" i used four but you can get two longer one and bend them its not hard to do and thats about it that would be dif from doing the 2" kit....

 

doesn't sound too complicated. did you take any pictures?

 

check out his profile there are a few on there

 

did you just fab up some bumper brackets? Id love to see pictures on how you did that.

 

 

Click on his user name and check out his gallery in his profile. He's got three pics. Black blazer, looks pretty good.

 

did you do tbar crank and shackles too or is that just PA 3" body lift?
that's the height im looking for with my truck.

 

You forget we're all lazy *** picture vultures...

 

the pictures look real nice. Thats one of my favorite blazers on the site. Do you have any pictures of the actual blocks or more importantly the bumper brackets?

 

did you have any technical problems with the lengths of cables and wires? or the engine fan lining up with radiator? or the steering column not reaching