Lifted my 2001 2dr, 2wd blazer.
#11
the 31s would fit now. 32s will most-likely want a 2" BL if you aren't going to trim.
#12
Yeah, I know.
#13
you should build a prerunner tubular bumper/skid plate with a small stinger on it. I think that would really set your truck off now with the lift and tires since yours is a 2 door. My 2wd that I lifted was a 4 door and like I said I had that westin safari bar on the front.
#14
I was probably just going to go with one of these.
http://cgi.ebay.com/ebaymotors/98-04...ht_4791wt_1165
http://cgi.ebay.com/ebaymotors/98-04...ht_4791wt_1165
#15
That would work too. Itd be cool to see a completly prerunnered out 2 door blazer. Im sure theres one around the forum but who knows. My old 4 door wouldnt of looked right really prerunnered out IMO so I just left it with the small lift and the 30s with the safari bar.
#16
There are a couple 4 doors on dezert dimes. And they look good
#17
That truck is so clean lookin i'm thinking taking my blocks off and lifting mine now. Is anything different lifting a 4 door?
#18
Should be the same.
#19
is your write up on the s10 forum, on the brakes only meant for if you're doing spindles? I'm looking at just doing a Moog suspension lift and 2" shackles to fit at least 30" tires just trying to be clear on the specifics
#20
Yes, that is if you want to do spindles. You're only going to get about an inch from the moogs though.