rear shocks and herding damper...
#1
rear shocks and herding damper...
My rig did not come with a tiller damper, but has the frame bracket. When searching the forum or any of the vendors I have not found the damper that is supposed to fit AND had the proper bracketry for the center link. When I find one that has all the bracketry, the end that connects to the crossmember looks wrong. Might just be the picture, but that's all I have to go by.
I have add-a-leafs and 2" shackle lift in the back. My shocks are near full extension when static. What shock (with the proper mounting ends) choices are there that will work okay...? I was thinking a shock for a stock ZR2 might be close, but might still come up a bit short.
Thanks,
Doug
I have add-a-leafs and 2" shackle lift in the back. My shocks are near full extension when static. What shock (with the proper mounting ends) choices are there that will work okay...? I was thinking a shock for a stock ZR2 might be close, but might still come up a bit short.
Thanks,
Doug
Thread
Thread Starter
Forum
Replies
Last Post
nkb1964
Steering, Suspension & Drivetrain
1
10-11-2009 04:35 PM
nkb1964
2nd Generation S-series (1995-2005) Tech
2
10-11-2009 04:34 PM