transfer case yoke question
#1
transfer case yoke question
hello, new here and i am completly stumped let me first start out by saying i have a 89 jimmy. totaly modified. i have droped in a 350 sbc and i am runing the stock 4x4 700 trany. i have cut all brakets and removed all of the ifs on the truck. i have replaced it with jeep running gears and put leaf springs on the front of it. i have had the rear drive saft made and in stalled and i am running on the street with no problems at all. the only thing i am lacking is the front drive shaft. so my question is there a place that will make a custom yoke to go on the transfer case to allow the jeep front drive shaft to be installed? ive heard of people doing this conversion all the time. any advice will be appriciated as long as it is helpful. please no bullies or no it alls. thanks.
#2
I have had done business with Advanced Adapters in the past with motor and trans swaps in the past , they may be able to help
#3
they do sell combination ujoints and you can run the stock blazer driveshaft if its the right length
Thread
Thread Starter
Forum
Replies
Last Post
Flyfishen
Engine & Transmission
7
06-18-2019 11:22 AM
old skool luvr
Steering, Suspension & Drivetrain
1
11-09-2009 10:28 PM