ever seal a battery case ?
#2
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
One would think the acid would eat right through it. Where is it crack? Top, Side, where?
When I was in the Army and station in Panama (A very long time ago) we use to have a battery rebuild station, the guy would cut the tops of the battery's off, straighten the plates out and put new acid in a reseal the top with heat, no silicone. like burning the plastic together...
When I was in the Army and station in Panama (A very long time ago) we use to have a battery rebuild station, the guy would cut the tops of the battery's off, straighten the plates out and put new acid in a reseal the top with heat, no silicone. like burning the plastic together...
#3
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
It was cracked on the very bottom near the corner
I used my map gas torch and heated a screw driver tip cherry red and ironed / melted the crack over in a well ventilated area
refilled with acid a couple days ago and put on a battery charger
all looks good
I used my map gas torch and heated a screw driver tip cherry red and ironed / melted the crack over in a well ventilated area
refilled with acid a couple days ago and put on a battery charger
all looks good
Thread
Thread Starter
Forum
Replies
Last Post
litterbug
Engine & Transmission
2
03-07-2011 09:14 PM
wienerdog
Steering, Suspension & Drivetrain
4
10-20-2008 09:56 AM