Hello everyone. I've been reading about folks doing the quadbeam mod and all posts and information appear to deal with a Blazer, or S10, but none mention doing this mod on a Bravada. There is a wiring difference between the Blazer and Bravada due to the Bravada having fog lights as a factory option. The fog lights shut off when the high beams are turned on.

Does anyone have the instructions on how to do the quadbeam mod on a 1997 Bravada so that all 6 lights stay on with the option to disable the quadbeam mod via a switch?

Thanks,
Tim

 

No one? No one's done the quadbeam mod on a mid 90's Bravada or has any information about it?

 

Not sure about the bravada. But I got a blazer with fog lights, did the quadbeam setup the same way. Not sure how different the wire setup really is tho.

 

Were the fog lights on your Blazer a factory option or were they added as aftermarket?

 

Factory

 

Is your Blazer a 95, 96, or 97?

Which quadbeam setup did you use? There's a few different ones that people have discussed.

 

I actually have a 99. Again not sure what exactly is different in wiring and such. And I cant remember who's I used. It was here on blazer forum. And if I look I will be able to tell you. It was just splicing into one of the wires and grounding them out on the rear rad support.