New Guy in AZ
Thread Starter
|
New Member
Joined: Aug 2011
Posts: 3
From: AZ
New Guy in AZ
First I want to say thanks for all the Info and Ideas I got from this forum before i joined up.
I recently bought a 94 Blazer with a 5.7 TBI and 166K miles. The truck has seen very little offroad use and is in great shape as far as the body and Interior. The motor is very weak and i am building a new one for it.
The new motor is a Late model 350 roller block bored .30 over, 20CC dish pistons with the Edelbrock Performer cam, lifters and springs, Comp Magnum Roller Tip rockers. New GM Vortec 062 Heads 64 CC chambers and SS 1.94-1.50 valves. GM Vortec to TBI Manifold.
I sm still trying to figure out what TBI and computer chip mods I need to do.
I will ty and attach a couple of pic's
I recently bought a 94 Blazer with a 5.7 TBI and 166K miles. The truck has seen very little offroad use and is in great shape as far as the body and Interior. The motor is very weak and i am building a new one for it.
The new motor is a Late model 350 roller block bored .30 over, 20CC dish pistons with the Edelbrock Performer cam, lifters and springs, Comp Magnum Roller Tip rockers. New GM Vortec 062 Heads 64 CC chambers and SS 1.94-1.50 valves. GM Vortec to TBI Manifold.
I sm still trying to figure out what TBI and computer chip mods I need to do.
I will ty and attach a couple of pic's
Thread
Thread Starter
Forum
Replies
Last Post
