New Member Area Are you new to Blazer Forum? WELCOME! Check in, tell us about yourself and your ride.

starting problem

Old Nov 9, 2008 | 12:52 PM
  #1  
juan8w1's Avatar
Thread Starter
Joined: Nov 2008
Posts: 8
juan8w1 is an unknown quantity at this point
Default starting problem

got up and turned the key and the motor turned over once and now its just clicking and the positive line is getting warm motor trys to turn and you can hear the starter click but no turning ok i take it off and leave the leads connected and turn the key and it spins but doesnt sound like it should am i correct in thinking i have a bad starter???? any help would be greatly appreciated .....


by the way this is a 94 chevy blazer with the vortec engine i just replaced the spider and was getting ready to ride but as it always goes when you fix one thing something else gives out
 
Old Nov 9, 2008 | 02:11 PM
  #2  
Outsydr's Avatar
Senior Member
Joined: May 2007
Posts: 591
From: Warren, Ohio
Outsydr is an unknown quantity at this point
Default RE: starting problem

how bad/long was your spider leaking? did you replace spark plugs etc too? when my fuel pressure regulator went out in my '94 it filled the cylinders with fuel and as a result the engine would not turn over (gas doesn't compress). At first I thought it was starter too took it off and took it to autozone to be tested and it was fine. When i did my fpr as i pulled the old plugs i tapped the key to blow the fuel out of the cylinders one by one.
If you have the starter off autozone or advance will test it for free if you think that is the problem.
 
Old Nov 9, 2008 | 07:07 PM
  #3  
swartlkk's Avatar
Administrator
Joined: May 2005
Posts: 41,331
From: Waterloo, NY
swartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond repute
Default RE: starting problem

Did you pressurize the system prior to putting the plenum back on?

Is your battery up to proper charge?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cgrett
2nd Generation S-series (1995-2005) Tech
9
Nov 15, 2010 09:08 PM
Sprocket
2nd Generation S-series (1995-2005) Tech
1
Mar 20, 2008 09:39 PM
mickey2001
2nd Generation S-series (1995-2005) Tech
1
Mar 13, 2006 11:51 AM
ghassell
2nd Generation S-series (1995-2005) Tech
1
Feb 6, 2006 09:51 PM
blazin97
1st Generation S-series (1983-1994) Tech
4
Jul 9, 2005 03:32 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:38 PM.