clear corner lenses
BF Veteran
Joined: Jan 2006
Posts: 2,612
From: Hampstead Maryland
RE: clear corner lenses
dude u can just pull the whole grille assembly off on the newer models. dont need to pull the headlights off. trust me. i did it when i shaved a peice off my clear corners just pull the assembly! lol
Junior Member
Joined: Jan 2006
Posts: 378
From: Northern VA
RE: clear corner lenses
95 Blazer with sealed headlights you just remove the two torx screws and the corner pops out, untwist the bulb assembly, remove clear bulb, install amber bulb, pop clear corner in, put screws back in. Shouldnt take much more than 10-15 minutes. I got mine for $30, but that was a few years back, theyre much cheaper now.
Joined: Aug 2005
Posts: 151
From:
RE: clear corner lenses
for the newer blazers (which you have by your picture), just pull the grill off
you may have to pull hard but don't pull it too far so you don't pull out the wiring on the bulbs,
2. take the bulbs out of the corners lights (very easy, just turn to the side then pull),
3. pull the corners out of the grill
4. put new corners in
5. and definitely get some silverstar bulbs, otherwise the amber from the bulb casing shows through on the clear corner, with the silverstars the bulb is chrome so you can't see it (check out my gallery if you want a looksee)
to reassembly, just put everything back where it came from
you may have to pull hard but don't pull it too far so you don't pull out the wiring on the bulbs,
2. take the bulbs out of the corners lights (very easy, just turn to the side then pull),
3. pull the corners out of the grill
4. put new corners in
5. and definitely get some silverstar bulbs, otherwise the amber from the bulb casing shows through on the clear corner, with the silverstars the bulb is chrome so you can't see it (check out my gallery if you want a looksee)
to reassembly, just put everything back where it came from
Beginning Member
Joined: Mar 2006
Posts: 15
From:
RE: clear corner lenses
ORIGINAL: cherryred4x4
95 Blazer with sealed headlights you just remove the two torx screws and the corner pops out, untwist the bulb assembly, remove clear bulb, install amber bulb, pop clear corner in, put screws back in. Shouldnt take much more than 10-15 minutes. I got mine for $30, but that was a few years back, theyre much cheaper now.
95 Blazer with sealed headlights you just remove the two torx screws and the corner pops out, untwist the bulb assembly, remove clear bulb, install amber bulb, pop clear corner in, put screws back in. Shouldnt take much more than 10-15 minutes. I got mine for $30, but that was a few years back, theyre much cheaper now.
Thread
Thread Starter
Forum
Replies
Last Post
