anyone know how to get access to the back of this panel ? I have a suction cup to pull it out, but it needs a little help from behind.

I took off the interior panels, and couldnt see any way to access it, took the brake light out and nothing there, and cant seem to get to it from underneath either.

here is a picture so you can all see exactly where the dent is.
http://i72.photobucket.com/albums/i1...1224254978.jpg

 

There may not be an access to get to that location... Typically there are small holes near the under side of the window frame where you could reach down in, but if you removed the interior panels in the back, you should have seen these.

You could always drill a small hole on the inside panel (careful of depth), then push on it with a wooden dowel or something similar...

 

yeah I was hoping i wouldnt have to do that but it seems im going to have to. i cant believe they would completely seal off that part of the body.

 

Unrelated to the OP but when I see pics of you guy's Blazer/Jimmys it reminds me of why I like them so much and own a 4x4 99 Jimmy inspite of all their irritating quirks.
They Look so Darn Good!!