are there LED taillights available for the 2nd gen 4dr blazers?

 

bulbs?

 

bulbs or whole assembly...

 

superbrightleds.com

wonder if they'll actually last along time

 

You'll also need an electronic Flasher unit.

 

There LED's, of course there gonna last a long time. Unless water gets in the housing or theres a severe voltage spike or short. But that will kill any bulb.

I build all my led bulbs my self though. Done my dome and floor lights, still gotta do my cargo, tail, and corner lights.

 

Your pretty much in the same boat as us first gen guys and either have to build your own or just use the bulbs.

Once you get the basics LEDs are not really hard to retrofit. I've had too many other things come up but heres my corner lights I done last year.

 

There are afew different housings sporting LED's on ebay (all red, black, clear)

Other than that your stuck with stock, and upgrading the flashers is a must for FULL LED use (tails, signals, hazards etc)

beleive it or not just some multi LED bulbs in the stock housing produces a full lens fill...

 

Unfortunately we get the short end of the stick for full LED assemblies. They make em for S10's, but not ours.

http://cgi.ebay.ca/95-00-01-02-03-04...item35a651b9f4

Those are about the only Tail lights for ours that come with LED's in them...not quite the same as the S10 or any other vehicles.

As everyone else said, if you replace your tail light bulbs with LED's you will have to get a LED Flasher to stop the super blink.

 

I really want to design and build a set of NICE Blazer LED tail lights.