2012.07 ROTM - Rottidog
#1
Tom (Rottidog) fought hard and won the ROTM battle in a tight race to the finish line. Take a look at his blown Blazer:



Description:
without modifications it's a stock blazer lol 110,000 kms, 63,000 miles. Now has a 20,000mile engine & modified!
Engine/Drivetrain Modifications:
Fitch Fuel Catalyst
dual 12" electric fans with custom aluminum shroud
Marine intake w/Bosch 36lb/hr injectors
Wynjammer supercharger
Wolf Performance dyno tune
2 degree colder plugs
MSD Blaster coil
Lunati torque cam
Lunati double 330in/lb springs
Comp Cams Ultra Pro Magnum roller rockers
High Energy lifters & push rods
Suspension Modifications:
2" shackles
1.5" T-Bar twist
Rancho 5401 steering stabilizer
Wheels/Tires Modifications:
32 x 11.5 BFG Mud Terrain KM
15" x 10" Pro Comp 98 Series
Interior/Exterior Modifications:
3" body lift
8000K HID's
Piaa 520i fogs
Chevy bowtie skull emblem
Flexie Flares
1.25" TB twist, 2" shackles
LED interior lights
Future Modifications:
- roll, powdercoat & install the bumper spacers front & back
- do my version of a quad beam with a relay on a switch so I control it with the HID's in all 4 headlights
- LED DRL's on the front bumper
- whatever crazy thoughts I may have & there are always many
& yeah a 20,000 mile/33,000 km engine (long story in my OP of "what to call this", Lunati cam & springs, CompCams ultra pro rockers, High Energy lifters & pushrods
other silly stuff like that - ugh!
Tom's garage
Tom's profile
Tom's albums



Description:
without modifications it's a stock blazer lol 110,000 kms, 63,000 miles. Now has a 20,000mile engine & modified!
Engine/Drivetrain Modifications:
Fitch Fuel Catalyst
dual 12" electric fans with custom aluminum shroud
Marine intake w/Bosch 36lb/hr injectors
Wynjammer supercharger
Wolf Performance dyno tune
2 degree colder plugs
MSD Blaster coil
Lunati torque cam
Lunati double 330in/lb springs
Comp Cams Ultra Pro Magnum roller rockers
High Energy lifters & push rods
Suspension Modifications:
2" shackles
1.5" T-Bar twist
Rancho 5401 steering stabilizer
Wheels/Tires Modifications:
32 x 11.5 BFG Mud Terrain KM
15" x 10" Pro Comp 98 Series
Interior/Exterior Modifications:
3" body lift
8000K HID's
Piaa 520i fogs
Chevy bowtie skull emblem
Flexie Flares
1.25" TB twist, 2" shackles
LED interior lights
Future Modifications:
- roll, powdercoat & install the bumper spacers front & back
- do my version of a quad beam with a relay on a switch so I control it with the HID's in all 4 headlights
- LED DRL's on the front bumper
- whatever crazy thoughts I may have & there are always many
& yeah a 20,000 mile/33,000 km engine (long story in my OP of "what to call this", Lunati cam & springs, CompCams ultra pro rockers, High Energy lifters & pushrods
other silly stuff like that - ugh!
Tom's garage
Tom's profile
Tom's albums






