looking to cut my fenders looking to see how much to cut cause idk what size tire i wanna go with so with if got diff pics with diff size tires that would be awesome so if you could show me how much you or friends have cut the fenders. so if any pics sweet an thanx

 

Figure out what tires you want to go with first, then worry about cuts.

 

Max you can do with no lift is 31s with minor trimming.

Makes a big difference with wheel offset too.

 

i cut my fenders back to the firewall. didnt cut it entirely off and slid the piece back into the fender, used rivets and was able to use the top 2 inner fender bolt holes. on the bottom used BFH and rivets. I have 33x12.5x15 on Z28 wheels. I rub the frame at almost full lock.

I used this guys method just cut a larger piece Skidz Cut-out Flares

 

well i have to sets of tires layin around from truck i only had for few months got a set of
33's then i also got 37's so if that helps with photos please post em

 

Going to bump this topic up, I just got some new 31 Toyos and they rub pretty hard on tight turns especially when the body is bouncing back and forth.
I trimmed the flare pretty far up but now the metal fender is rubbing and I am worried about shredding my tires. How far back can I go in cutting the fender?

 

Not sure about your Z, but I can go as far as 3" back about one third to mid way up in my fenders. 4" on the bottom. Already taken off 2", with a 3" body lift and still need to take off more. Loosen up your inner fender well and you'll be able to see where your firewall begins.

 

Yeah thats what I was thinking. I remember taking one off when I did the heater core, Ill pull it and see. I only need about 1.5-2 inches I think.
Crossing my fingers.

 

35 12.50s on stock suspension

 

hahahaha nice