Steering, Suspension & Drivetrain Questions about your steering, suspension, axles, and/or transfer case? Post up here.

Ball joint replacement. Looking for opinion.

  #1  
Old 09-22-2015, 11:18 PM
Beginning Member
Thread Starter
Join Date: Jan 2015
Posts: 20
natem504 is on a distinguished road
Default Ball joint replacement. Looking for opinion.

Hello I am planing on replacing all 4 of my ball joint on my 04 blazer. They are all bad along with the idler and pitman arm. I want to get an option if buying the suspension kit of 1A auto.com was a good idea for 115$ u get everything ball joints idler pitman tie rods adjustment selves and sway bar linkage. I'm not wanting to drop 250$ on Moog ball joint and idler and Pitman arm. I only put about 12,000 on it a year. They do come with a life time warranty so I was just wanting to get an opinion of what I should do. Also the ones for 115 are not greasable if heard good and bad with that but what would be your opinion. Thanks. Also the 115 ones are not cheep cheep but still are cheaper then most.
 
  #2  
Old 09-30-2015, 03:42 PM
Mrthelaxer's Avatar
New Member
Join Date: Feb 2013
Location: Chicago
Posts: 73
Mrthelaxer is on a distinguished road
Default

I went the cheap route and regret it, I bought full kit for the steering so: pitman arm, idler arm, tie rods and sleeves and ball joints. the ball joints went bad within a year of me driving it as a student so less than 5000 miles a year. within a year the ball joints went bad and ruined the alignment and added significant looseness to the steering. Within two years the tie rods went bad and again messed with the alignment. I would say buy the right parts and only do it once especially with something thats such a pain like ball joints. If you buy bad parts and they wear it wont only ruin those parts but will also make your tires wear poorly and add extra stress to the front end.
 

Last edited by Mrthelaxer; 09-30-2015 at 03:45 PM.
  #3  
Old 10-02-2015, 08:14 PM
damadtech's Avatar
Beginning Member
Join Date: Dec 2012
Posts: 14
damadtech is on a distinguished road
Default

That is wayyyy too cheap for how much you're getting for them to be decent quality parts. I can't find any brand listed on their site either for any of the parts they sell. Personally, I think you should find out the brand they are selling and check into those items else where to see what they're selling for, who actually carries them for sale and if there are any online reviews. If it sounds too good to be true........
 
  #4  
Old 10-03-2015, 10:49 PM
Junior Member
Join Date: Oct 2011
Location: Chicago, IL.
Posts: 337
10-78 edac is on a distinguished road
Default

The nice thing about putting in the cheep ones is that a year later when you're doing the job again is that the bolts are easier to get out.
I recommend quality parts the first time.
 
  #5  
Old 10-04-2015, 09:43 PM
Beginning Member
Thread Starter
Join Date: Jan 2015
Posts: 20
natem504 is on a distinguished road
Default

thanks for the input everyone I ended up getting all moog balljoints and Duralast idler arm with lifetime warranty. was a pain to get off the lower ball joints but everything is on and done.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
icculusjr
Article Submissions/Discussions
20
03-13-2010 08:43 AM
lennyblazer
Steering, Suspension & Drivetrain
4
01-08-2010 08:28 PM
soundguy
Steering, Suspension & Drivetrain
7
08-23-2007 08:03 PM
ejoy1220
General Tech Help
12
10-08-2006 06:45 PM


Thread Tools
Search this Thread
Quick Reply: Ball joint replacement. Looking for opinion.


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

© 2021 MH Sub I, LLC dba Internet Brands