ball joint spacers some issues
#1
ball joint spacers some issues
So I installed my ball joint spacers today on the drivers side (started raining) everything was going smooth. Went to put the tire back on and something was holding it up from going on all the way. Looked behind and saw that the 2 inch new bolts i used where to long and hit the rims, so I cut them off at nut level. All fixed?, not yet my friend. Rim still rubs one nut. New options, 1 offset rims or wheel spacers. I had 40 bucks in my pocket so I bought 5/16th spacers. All set for now. Will pick up another set of spacers for the rear for the time being. will also adjust the camber tomorrow. Heres a pick with add a leafs and BJ spacers. 1 1/2 --2 inches in the rear 1 inch in the front plus another inch torsion bar crank
#5
The holes didnt line up perfect and the camber is off big time, but I like it
#8
Was able to do a driveway eyeball camber adj that looks pretty good this morning. took it for a drive, rolls good wheel straight, maybe I got lucky. I`ll keep an eye on it though. Forgot to take pictures but the camber was pretty severe.
#9
How thick are the ball joint spacers you installed, and do you still have enough threads in the rims bolts after putting on the wheel spacers? Smart lift setup you have btw! The best way for a small lift in my opinion.
Last edited by 89 Blazer Lebanon; 05-12-2013 at 12:20 PM.