my 2000 blazer brakes loses vacuum when I push on brake pedal. How do you replace vacuum booster?

 

Remove the master cylinder go under the dashboard remove the pin that connect to brake pedal and unbolt the 4 bolts holding the booster on and then pull it out and do the opp. To install

 

you should be able to get the booster out of there without taking off the brake lines, i know on the full size trucks you can just hang the mater out of the way with a bungee cord or something so you dont have to bleed the brakes

 

HABAFAB makes it sound like a piece of cake BUT once again...... been there and OMFG......2-3 HOURS OR MORE!!!

 

lol pretty much like every write up i read. find part remove bolts and remove part

 

abig84......OH HAHAHAHAHAHAAAAAAAAAAAAAAAAAAHAHAHAHAHAHAHAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHAHAHAHAHAHAH AHAHAAAAAAAAAAAAAAAAAAAAAAAAAAAA