2005 S10 Blazer Base Model 2dr rwd 4.3

I am looking for torque specs. for front R/S lower control arm bushing nut & bolt to frame.

Also front R/S upper control arm bushing nuts [2]

Thanks in Advance
Ken

 

My 2000 factory service manual says the lower control arm bushing nuts get torqued to 81 foot pounds. The upper control arm retaining nuts get 85 foot pounds. The torque specs. are the same for 2 and 4 wheel drive.

 

Thanks for the info, is the torque specs. for the upper arm for the [2] bushing nuts or the [2] nuts and bolts [were the align. shims go] that attach it to the frame. I am looking for the [2] bushing nuts specs. Thanks Again

 

The factory service manual reads 85 foot pounds for both pairs of nuts.

 

Thangs Again !