idler arm and pitman arm prob
#1
idler arm and pitman arm prob
Trying to replace the idler arm and pitman arm on my 98 jimmy 4x4. Am having trouble separating them from the centerlink . Tried a 2-jaw puller and a pickle fork but can't get them apart. Any suggestions?
#2
might need a smaller pickle fork. on some trucks i find that the normal size one just kinda spreads the forks and doesnt really push it. if i go to the smaller one they will come right off. or a air hammer might work
#3
tried air hammer, still will not budge
#4
I used a two jaw puller and a impact , came right off . As for the idler arm beat the crap out of it . BFH is preferred tool to use .
#5
I couldn't keep the 2-jaw puller from slipping off, could I heat it up some with a torch?
#6
Finally got the idler arm off center link , but still working on the pitman arm.
Thread
Thread Starter
Forum
Replies
Last Post
SmokedGhouda
Steering, Suspension & Drivetrain
5
10-08-2013 01:17 PM
cartunez2004
2nd Generation S-series (1995-2005) Tech
4
04-09-2011 09:01 PM
greatwhite
Steering, Suspension & Drivetrain
3
11-28-2010 11:54 PM
kornphlake
2nd Generation S-series (1995-2005) Tech
10
12-18-2006 02:18 AM