Hi all,
Slight problem with my 4 wheel drive. First when in 4Hi the transmission appeared to lock up when turning a corner, specially on full lock of the steering. Today I had the vehicles front raised to check the operation of the front Diff. Everything seemed to be ok. I put the trans in 4 hi then 4 lo, and now the transmission refuses to go back into 4 hi. 4 lo and 2 hi appear to be ok. If i try to put it in 4 hi with the vehicle in drive, nothing happens. In neutral both 4 hi and 4 lo buttons flash and it promptly switches to 2 hi.

Any ideas on this. My thought would be a problem with the actuator motor.

TinW