Hello, I know y'all are probably sick of sas questions but I plan on starting as soon as I get my c10 running. I was just gonna throw a dana 30 under the front and keep the 7.625 in the rear with some 5x4.5 adapters since the rear has been rebuilt with a truetrac. I don't plan on going any larger than 35" tires so I think I should be good.

putting together a check list. What else should I need besides the sas hanger kit, dana 30 and possibly a Pittman arm from an astrovan? A driver side dana 30 will work fine with our transfer case?

 

Check out Blaz's build thread. He did a Dana 30 build that turned out very nice.
https://blazerforum.com/forum/builds...-blazer-75972/