i have a 02 trailblazer and the servo will not come out. Why?

 

I assume you are referring the 1-2 servo on the side of the trans and if so do you have the retaining ring removed? Even after that mine was a bit of a challenge to remove due to the orings hanging up and making removal a pain.

 

 

yes the 1/2 servo snap ring is out but the servo will not move i used a pip ranch and a hammer to try to get it to spin and there was no luck it will not go in or out spin nothing

 

try tapping the cover with a hammer to loosen things up. rubber mallet if you have one