Blazer Forum - Chevy Blazer Forums
0 2025/07/21 04:30:29
Better picture of the issue
Better picture of the issue
0 2025/03/18 08:00:44
0 2025/03/18 08:00:29
The boot at manifold was split.
The boot at manifold was split.
0 2025/03/18 07:59:39
The weather while I was working on this.
The weather while I was working on this.
0 2025/03/18 06:11:51
0 2025/03/17 18:16:42
0 2023/04/03 17:20:23
0 2023/04/03 17:20:09
Had to angle the pitman arm puller to grab the center link but it worked pretty well..
Had to angle the pitman arm puller to grab the center link but it worked pretty well..
0 2023/03/13 17:25:57
0 2023/03/10 18:14:29
Will said to file part of the weld but I chose to go with Moog.
Will said to file part of the weld but I chose to go with Moog.
0 2023/03/10 18:14:25
The Proforged part is one the left and you can see how it is taller and has bigger bearing than the Moog. I returned the Proforged parts. The truck aligned and drives great with the Moog parts.
The Proforged part is one the left and you can see how it is taller and has bigger bearing than the Moog. I returned the Proforged parts. The truck aligned and drives great with the Moog parts.
0 2023/03/09 13:15:18
Tbis how the Moog part fit.
Tbis how the Moog part fit.
0 2023/03/09 13:15:15
0 2023/03/09 13:10:59
0 2021/04/06 21:04:35
At Deweys bridge near Moab UT
At Deweys bridge near Moab UT
0 2021/04/06 21:04:29
I guess that one is tight
I guess that one is tight
0 2021/03/15 19:13:22
The evap purge solenoid the ears are crushed. Also one of the 10 hold downs was gone so I guess extra torque was needed
The evap purge solenoid the ears are crushed. Also one of the 10 hold downs was gone so I guess extra torque was needed
0 2021/03/15 19:13:13
Leakage at Cylinder 6 the second worst misfire frequency
Leakage at Cylinder 6 the second worst misfire frequency
0 2021/03/15 19:09:00
Evidence of leakage at cylinder 1 which had the most misfires.
Evidence of leakage at cylinder 1 which had the most misfires.
0 2021/03/15 19:08:55
0 2021/03/15 18:41:37
After welding and ceramic coating
After welding and ceramic coating
0 2021/03/15 18:41:28
A close up and the was a crack on thr #2 cylinder header tube and where the 3 tubex came together
A close up and the was a crack on thr #2 cylinder header tube and where the 3 tubex came together
0 2021/03/15 18:38:02
Passenger side on the left. Notice the damage on the ball flange. Undamaged driver side for comparison
Passenger side on the left. Notice the damage on the ball flange. Undamaged driver side for comparison
0 2021/03/15 18:37:54
0 2021/03/15 18:29:45
A closer picture of the flange
A closer picture of the flange
0 2021/03/15 18:26:42
The one on the left is passenger side header. Also there were cracks on the #2 cylinder tube and where the camr together.
The one on the left is passenger side header. Also there were cracks on the #2 cylinder tube and where the camr together.
0 2021/03/15 18:26:12
The fan mounted ...I will adjust to get the fan closer
The fan mounted ...I will adjust to get the fan closer
0 2021/02/24 13:44:23
A close up of the bracket
A close up of the bracket
0 2021/02/24 13:43:52
0 2021/02/24 13:42:04
The fans mounted
The fans mounted
0 2021/02/24 13:41:34
A close up of the bracket
A close up of the bracket
0 2021/02/24 13:40:45
0 2021/02/24 13:37:36
This is how my fans are currently installed. Thinking about how to install on new radiator.
This is how my fans are currently installed. Thinking about how to install on new radiator.
0 2021/02/19 15:38:06
0 2020/11/09 12:28:45
0 2020/09/30 15:31:54
0 2020/09/30 15:30:53
0 2020/08/02 20:09:11
After a trip to car wash
After a trip to car wash
0 2020/07/28 18:49:21
0 2020/07/28 18:47:56