Engine stuff

May 17, 2014

8

0

Description:
4.3l v6 vortec chevy blazer engine mods, slow proses so far have added the old intake system and put a vent hose under
The air box for ventilation, added spectre crank case air breather, plugged air intake head, will be doing a PVC pipe intake system soon...

Read more »

image putting stock intake system back on
I had cut one of the tabs off the box to make
It Easier to take out and put in

image putting stock intake system back on I had cut one of the tabs off the box to make It Easier to take out and put in

0 2014/05/17 13:36:32 Blazer2005

image drilled a hole under the air box and stuck
A hose threw that extends down to the bottom
Of the engine compartment for venting

image drilled a hole under the air box and stuck A hose threw that extends down to the bottom Of the engine compartment for venting

0 2014/05/17 13:36:32 Blazer2005

image crank case vent, will be removing
And replacing with a large oil breather

image crank case vent, will be removing And replacing with a large oil breather

0 2014/05/17 13:40:27 Blazer2005

image- Spectre crank case air breather

image- Spectre crank case air breather

0 2014/05/22 20:40:28 Blazer2005

image- plugged intake head

image- plugged intake head

0 2014/05/22 20:40:28 Blazer2005

imageK&N filter

imageK&N filter

0 2014/06/08 10:32:18 Blazer2005

image vent hose comming out of lower
Intake box ending at inner fender

image vent hose comming out of lower Intake box ending at inner fender

0 2014/06/08 10:34:43 Blazer2005

image throttle body

image throttle body

0 2014/06/08 10:34:43 Blazer2005