Blazer Forum - Chevy Blazer Forums
HID 9000K lights and KC daylighters lit up in midday. 2 inch receiver welded to brush guard for 9000LB portable winch mount.
HID 9000K lights and KC daylighters lit up in midday. 2 inch receiver welded to brush guard for 9000LB portable winch mount.
2 2009/12/29 14:42:00
westin brush guard with KC daylighters. the bottom 8 inches of the brush guard was cut off and removed for more clearance then the mounts were reworked and welded to the frame higher than before. lower valance was removed. custom rock sliders built and installed and a custom top roof rack is in progress of being built. spray on bed liner on fender flares and lower 12 inches of body. stock rims painted black. black out lower turn signal lights.
westin brush guard with KC daylighters. the bottom 8 inches of the brush guard was cut off and removed for more clearance then the mounts were reworked and welded to the frame higher than before. lower valance was removed. custom rock sliders built and installed and a custom top roof rack is in progress of being built. spray on bed liner on fender flares and lower 12 inches of body. stock rims painted black. black out lower turn signal lights.
0 2009/12/29 14:42:00
spintech dual exhaust custom built by me with double wall stainless steel tips. custom bike rack mounted to rear spare tire mount and rear spare tire moved down 3 inches for better view out of the back window. 4.5 inch round fog light mounted below bumper for better view while reversing in the dark.... custom dent on drivers side bumper!
spintech dual exhaust custom built by me with double wall stainless steel tips. custom bike rack mounted to rear spare tire mount and rear spare tire moved down 3 inches for better view out of the back window. 4.5 inch round fog light mounted below bumper for better view while reversing in the dark.... custom dent on drivers side bumper!
6 2009/12/29 14:42:00
MAC air intake with high flow filter. hyper grounding kit mounted to 2 places on the engine and 3 places on the body (better ground and better wiring=better power)
MAC air intake with high flow filter. hyper grounding kit mounted to 2 places on the engine and 3 places on the body (better ground and better wiring=better power)
0 2009/12/29 15:02:04
better picture of my custom bike rack mount i built and rear wheel moved down 3 inches. rear light lit up.
better picture of my custom bike rack mount i built and rear wheel moved down 3 inches. rear light lit up.
2 2009/12/29 15:02:04
passenger side 3/4 shot.....
passenger side 3/4 shot.....
0 2009/12/29 15:02:04
close up of 2x4 .250 square tubing custom made rock sliders and rino liner sprayed on the lower 12 inches of the truck.
close up of 2x4 .250 square tubing custom made rock sliders and rino liner sprayed on the lower 12 inches of the truck.
0 2009/12/29 15:10:22
roof rack that i built
roof rack that i built
1 2010/04/03 10:53:18
another pic of my custom roof rack
another pic of my custom roof rack
0 2010/04/03 10:53:18
you wont find another one out there quite like this. i modeled it after the new FJ cruiser roof racks
you wont find another one out there quite like this. i modeled it after the new FJ cruiser roof racks
0 2010/04/03 10:53:18