Blazer Forum - Chevy Blazer Forums
2 - No bolts on threshhold or kick panel, just pull
2 - No bolts on threshhold or kick panel, just pull
0 2009/12/23 20:11:56
3 - Bolts to be removed for passenger panel
3 - Bolts to be removed for passenger panel
0 2009/12/23 20:11:56
5 - Disconnect harness, not wires at plugs
5 - Disconnect harness, not wires at plugs
0 2009/12/23 20:11:56
6 - Easier to remove with panel still attached!
6 - Easier to remove with panel still attached!
0 2009/12/23 20:13:51
8 - Remove harness connector by pinching it
8 - Remove harness connector by pinching it
0 2009/12/23 20:13:51
9 - Slide rubber grommet out, and then twist cable out to remove
9 - Slide rubber grommet out, and then twist cable out to remove
0 2009/12/23 20:13:51
11 - Carefully pull parking brake cable through hold
11 - Carefully pull parking brake cable through hold
0 2009/12/23 20:15:45
21 - Remove these braces and 8 bolts
21 - Remove these braces and 8 bolts
0 2009/12/23 20:15:45
13 - Pull out bezel enough to remove this switch and remove harness connection
13 - Pull out bezel enough to remove this switch and remove harness connection
0 2009/12/23 20:15:45
14 - This spring is the glove box catch, lift it to drop box
14 - This spring is the glove box catch, lift it to drop box
0 2009/12/23 20:17:08
15 - Main dash harness
15 - Main dash harness
0 2009/12/23 20:17:08
16 - Headlight switch wiring (Headlight switch stays in bezel)
16 - Headlight switch wiring (Headlight switch stays in bezel)
0 2009/12/23 20:17:08
17 - Console after radio removal
17 - Console after radio removal
0 2009/12/23 20:18:37
22 - Remove 10mm bolts on either side of dash, here...
22 - Remove 10mm bolts on either side of dash, here...
0 2009/12/23 20:18:37
22b - And here, inside glove box area
22b - And here, inside glove box area
0 2009/12/23 20:18:37
24 - Disconnect these wires, box will come out AFTER dash, not before as I wrote in the forum
24 - Disconnect these wires, box will come out AFTER dash, not before as I wrote in the forum
0 2009/12/23 20:20:08
26a - This needs to be disconnected before removing dash, I didn't mention that in the forum
26a - This needs to be disconnected before removing dash, I didn't mention that in the forum
0 2009/12/23 20:20:08
26 - Dash out!
26 - Dash out!
0 2009/12/23 20:20:08
27 - Area to cut out
27 - Area to cut out
0 2009/12/23 20:21:34
29 - Bolt to be removed inside this box
29 - Bolt to be removed inside this box
0 2009/12/23 20:21:34