Blazer Forum - Chevy Blazer Forums
Two at top of feont fender. Riveting to flare lip.
Two at top of feont fender. Riveting to flare lip.
0 2018/09/20 16:07:13
inner fender bolt on the side. Screw on bottom.
inner fender bolt on the side. Screw on bottom.
0 2018/09/20 16:07:23
Three home made brackets for rear door. Bent by hand, galvanized 1" steel strips. Riveting to the door, will also be spray foaming the void.
Three home made brackets for rear door. Bent by hand, galvanized 1" steel strips. Riveting to the door, will also be spray foaming the void.
0 2018/09/20 16:07:33
Rear will be riveted to factory fender lip. Once the door section is cut out, it lines up perfect.
Rear will be riveted to factory fender lip. Once the door section is cut out, it lines up perfect.
0 2018/09/20 16:07:51
0 2018/09/20 17:46:00
0 2018/09/20 17:46:07
0 2018/09/21 13:30:37
0 2018/09/22 17:14:58
0 2018/09/22 17:16:26
0 2018/09/22 17:16:36
0 2018/09/22 17:16:48
0 2018/09/22 17:17:00
There will be a rivet above, and below the vise grip. As well as the bolt i will be putting through the factroy bracket on the bumper flare.
There will be a rivet above, and below the vise grip. As well as the bolt i will be putting through the factroy bracket on the bumper flare.
0 2018/09/22 17:17:14
0 2018/09/22 17:17:27
0 2018/09/22 18:03:15
0 2018/09/22 18:03:29
0 2018/09/22 18:03:42
0 2018/09/23 09:19:31
0 2018/09/23 16:00:44
0 2018/09/23 16:17:25
0 2018/09/23 16:17:48
0 2018/09/23 16:18:05
0 2018/09/23 16:18:14
0 2018/09/23 16:19:08
0 2018/09/23 16:19:28
0 2018/09/23 16:22:14
0 2018/09/23 16:22:31
0 2018/09/23 16:22:45
0 2018/09/23 16:32:17
0 2018/09/23 16:32:36
0 2018/09/25 14:56:34
0 2018/09/25 14:56:41
0 2018/09/25 14:56:53
0 2018/09/25 14:57:02
0 2018/09/25 14:58:07
0 2018/09/25 14:58:59
0 2018/09/25 14:59:07
0 2018/09/25 14:59:13
0 2018/09/25 17:23:13
0 2018/09/29 09:34:16