Blazer Forum - Chevy Blazer Forums
The 96, with some polished alloy wheels i had from the '97.
The 96, with some polished alloy wheels i had from the '97.
2 2013/09/02 17:48:46
4 1 002
4 1 002
1 2011/04/05 16:23:14
davesfile006 1[1]
davesfile006 1[1]
1 2010/08/28 20:42:23
image
image
0 2013/09/03 16:01:17
image
image
0 2013/09/02 18:05:44
66 003
66 003
0 2011/06/07 18:56:28
66 002
66 002
0 2011/06/07 18:56:28
430011[1]
430011[1]
0 2011/04/30 19:25:56
got alot off it now. still want to pull the engine, trans and tailgate.
got alot off it now. still want to pull the engine, trans and tailgate.
0 2011/04/30 19:20:55
engine compartment, packed with horsepower & torque!
engine compartment, packed with horsepower & torque!
0 2011/04/23 20:09:40
blazer with my single axle 6x10 box trailer. pulls it fine but does it ever work it. of course i dont use o/d when towing, gets about the same as the ranger when pulling, 10-12. it doesnt stop as well as the ranger does. this was before my brake job with new front rotors/calipers. im going to try it again sometime. the automatic is great for manurvering in tight spots, the ranger is a std shift and i use 4L with the front hubs unlocked when backing with it.
blazer with my single axle 6x10 box trailer. pulls it fine but does it ever work it. of course i dont use o/d when towing, gets about the same as the ranger when pulling, 10-12. it doesnt stop as well as the ranger does. this was before my brake job with new front rotors/calipers. im going to try it again sometime. the automatic is great for manurvering in tight spots, the ranger is a std shift and i use 4L with the front hubs unlocked when backing with it.
0 2011/04/05 18:47:19
rear axleshafts, i worked on the bearing/seal surface as best as i could with scotchbrite pads. surprizeingly the bearings looked good. gave it new seals and hope for the best, was soaking the left side shoes with 80w90. low on diff oil when i got it.
rear axleshafts, i worked on the bearing/seal surface as best as i could with scotchbrite pads. surprizeingly the bearings looked good. gave it new seals and hope for the best, was soaking the left side shoes with 80w90. low on diff oil when i got it.
0 2011/04/05 18:47:19
took this photo the day we went and picked it up, thats my parents log home behind it.
took this photo the day we went and picked it up, thats my parents log home behind it.
0 2011/04/05 18:41:46
back view.
back view.
0 2011/04/05 18:41:46
had to paint the rear cover too, i should have really replaced it, didnt leak though, i'll keep a close eye on it.
had to paint the rear cover too, i should have really replaced it, didnt leak though, i'll keep a close eye on it.
0 2011/04/05 18:41:46
painted rear drums also, they were really rusty, had been turned last august, so inside was good. we'll see how well the paint holds up.
painted rear drums also, they were really rusty, had been turned last august, so inside was good. we'll see how well the paint holds up.
0 2011/04/05 18:35:19
new front rotors/calipers. since these wheels show so much of the brakes, couldnt resist a little paint. its rustolem hammerd finish, copper.
new front rotors/calipers. since these wheels show so much of the brakes, couldnt resist a little paint. its rustolem hammerd finish, copper.
0 2011/04/05 18:35:19
very pitted side gears,worn spiders, ring & pinion fine. was low on oil when i got it, after i filled it up l.h. axleshaft seal started leaking. took this pic when i took it down to put axleshaft seals in it.
very pitted side gears,worn spiders, ring & pinion fine. was low on oil when i got it, after i filled it up l.h. axleshaft seal started leaking. took this pic when i took it down to put axleshaft seals in it.
0 2011/04/05 18:35:19
4 1 001
4 1 001
0 2011/04/05 18:24:45
4 1 004
4 1 004
0 2011/04/05 16:26:35
4 1 003
4 1 003
0 2011/04/05 16:26:35
new tires, older but fresly ploished rims
new tires, older but fresly ploished rims
0 2011/01/31 19:28:25
new tires, older but fresly polished rims
new tires, older but fresly polished rims
0 2011/01/31 19:28:25
rims from the '95, getting cleaned up and ready for tires.
rims from the '95, getting cleaned up and ready for tires.
0 2011/01/24 15:35:02
the '97 4x4 4dr console shift automatic.
the '97 4x4 4dr console shift automatic.
0 2011/01/01 21:24:27
just waxed.
just waxed.
0 2011/01/01 21:23:34
aUG202122007[1]
aUG202122007[1]
0 2010/08/28 20:48:45