Rising_Skeet's Photos

View Profile

0 2016/01/17 16:17:21 Rising_Ske

Today 2016/01/17 i finished the drop with the BellTech drop keys and dropped it an additional 2" in the front giving her an evil stance. Next is the TA rims or Vette rims along with the Wing West body kit.

Today 2016/01/17 i finished the drop with the BellTech drop keys and dropped it an additional 2" in the front giving her an evil stance. Next is the TA rims or Vette rims along with the Wing West body kit.

1 2016/01/17 15:58:48 Rising_Ske

Me and my Dad did this work in under 2 weeks in between rain storms and him having to work.

Me and my Dad did this work in under 2 weeks in between rain storms and him having to work.

0 2016/01/17 15:58:48 Rising_Ske

In the end this is how she came out, ran out of time and had to drive to my next unit, after this photo was taken we adjusted the OEM torsion keys and dropped the front an 1" so it wasn't this high anymore.

In the end this is how she came out, ran out of time and had to drive to my next unit, after this photo was taken we adjusted the OEM torsion keys and dropped the front an 1" so it wasn't this high anymore.

0 2016/01/17 15:55:30 Rising_Ske

Painted the factory 15" steel rims and center caps, and mounted them on 235/65r15 Cooper Cobra GTs

Painted the factory 15" steel rims and center caps, and mounted them on 235/65r15 Cooper Cobra GTs

0 2016/01/17 15:55:30 Rising_Ske

New alternator, water pump. new radiator hoses and A/C compressor along woth the eBay cold air intake.

New alternator, water pump. new radiator hoses and A/C compressor along woth the eBay cold air intake.

0 2016/01/17 15:55:30 Rising_Ske

Finished aligning the front end.

Finished aligning the front end.

0 2016/01/17 15:53:08 Rising_Ske

New headlight harness from LMC along with the new sheet metal and lights.

New headlight harness from LMC along with the new sheet metal and lights.

0 2016/01/17 15:53:08 Rising_Ske

New tail lights and the BellTech 3"in drop blocks were installed.

New tail lights and the BellTech 3"in drop blocks were installed.

0 2016/01/17 15:53:08 Rising_Ske

After removing the fenders, nose and good, started seeing the real damage to thh project.

After removing the fenders, nose and good, started seeing the real damage to thh project.

0 2016/01/17 15:50:23 Rising_Ske

Side view of the truck before the build.

Side view of the truck before the build.

0 2016/01/17 15:50:23 Rising_Ske

Front shot of the truck before the build.

Front shot of the truck before the build.

0 2016/01/17 15:50:23 Rising_Ske