Blazer Forum - Chevy Blazer Forums
0 2018/09/21 13:30:37
0 2018/09/20 17:46:07
0 2018/09/20 17:46:00
Rear will be riveted to factory fender lip. Once the door section is cut out, it lines up perfect.
Rear will be riveted to factory fender lip. Once the door section is cut out, it lines up perfect.
0 2018/09/20 16:07:51
Three home made brackets for rear door. Bent by hand, galvanized 1" steel strips. Riveting to the door, will also be spray foaming the void.
Three home made brackets for rear door. Bent by hand, galvanized 1" steel strips. Riveting to the door, will also be spray foaming the void.
0 2018/09/20 16:07:33
inner fender bolt on the side. Screw on bottom.
inner fender bolt on the side. Screw on bottom.
0 2018/09/20 16:07:23
Two at top of feont fender. Riveting to flare lip.
Two at top of feont fender. Riveting to flare lip.
0 2018/09/20 16:07:13
Using factory bracket for the front bumper.
Using factory bracket for the front bumper.
0 2018/09/20 16:07:02
0 2018/09/20 15:56:39
Rear flare will be riveted to factory fender lip. It lines up nicely after the door is cut out. There are no brackers needed for this one.
Rear flare will be riveted to factory fender lip. It lines up nicely after the door is cut out. There are no brackers needed for this one.
0 2018/09/20 15:56:27
0 2018/09/20 15:56:14
Bracket locations, bent them by hand, sturdy enough they wont moved onve riveted to the door. Will also spray foam void.
Bracket locations, bent them by hand, sturdy enough they wont moved onve riveted to the door. Will also spray foam void.
0 2018/09/20 15:56:04
0 2018/09/20 15:55:49
0 2018/09/20 15:55:41
Fender bolt on side bracket, screw on the bottom where the c clamp is.
Fender bolt on side bracket, screw on the bottom where the c clamp is.
0 2018/09/20 15:55:32
Two brackets at the top. Riveting to fender lip.
Two brackets at the top. Riveting to fender lip.
0 2018/09/20 15:55:22
0 2018/09/20 15:55:09
Cutting out bottom bracket. Drilling hole in top one and adding a bolt.
Cutting out bottom bracket. Drilling hole in top one and adding a bolt.
0 2018/09/20 15:54:47
0 2018/09/18 17:17:06
0 2018/09/18 17:16:53
0 2018/09/18 17:16:25
0 2018/09/18 17:16:13
0 2018/09/18 17:16:05
0 2018/09/18 17:15:56
0 2018/09/18 17:15:41
0 2018/09/18 16:58:50
0 2018/09/18 16:58:40
0 2018/09/18 16:58:29
0 2018/09/18 16:57:36
0 2018/09/18 16:57:18
0 2018/09/18 16:57:09
0 2018/09/18 16:56:56
0 2018/09/18 16:56:45
Worked great!
Worked great!
0 2018/09/17 17:00:24
Measuring tool (curtainer hanger)
Measuring tool (curtainer hanger)
0 2018/09/17 16:59:35
Adapters
Adapters
0 2018/09/17 16:59:26
Plug in cutter i used. Sooooooo much better...
Plug in cutter i used. Sooooooo much better...
0 2018/09/17 16:54:59
Battery powered cutter i used
Battery powered cutter i used
0 2018/09/17 16:54:45
0 2018/09/17 16:51:13
0 2018/09/17 16:51:04